EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PEEK/PEI Polymer Blends for Fused Filament Fabrication: Processing, Properties, and Printability

Conor McCrickard, Adrian Boyd iD, Krzysztof Rodzen, Edward Archer iD, Faisal Manzoor iD, Jawad Ullah iD

Polymers · 30.12.2025 · 18 (1) · 113

DOI: 10.3390/polym18010113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.12.2025. Verfasst von Conor McCrickard und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, University of Ulster, York Street, Belfast BT15 1ED, UK. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Printing with high-performance polymers such as polyether ether ketone (PEEK) and polyetherimide (PEI) presents issues regarding shrinkage and warpage due to elevated temperatures. One method highlighted to mitigate against this is through polymer blending. This study explores the development and characterization of PEEK and PEI blends as filament for fused filament fabrication (FFF) in additive manufacturing. Filaments were produced via melt extrusion using PEEK/PEI weight ratios 100/0, 80/20, 70/30, 60/40, 50/50, 40/60, 20/80, and 0/100 (wt.%). The aim is to identify an optimum blend which enhances printability and maintains mechanical and thermal integrity. The extruded filaments were first characterized through differential scanning calorimetry (DSC) to determine miscibility with all ratios presenting a single glass transition temperature. Samples were then 3D-printed and assessed through mechanical testing, DSC, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The PEEK/PEI 80/20 (wt.%) blend was recognized as the optimum blend for maintaining crystallinity (35%) as well as good mechanical properties, averaging ultimate tensile strengths (UTSs) of 75.6 MPa and a Young’s modulus of 1338 MPa. Thermal properties also improved while warpage reduced and printability improved.

Schlagwörter

Stichwörter der Autor:innen

3D printingcrystallinitymechanical propertiespolyether ether ketonepolyetherimide

Autor:innen und Institutionen

  • School of Engineering, University of Ulster, York Street, Belfast BT15 1ED, UK.

ORCID-Profile: Adrian Boyd, Edward Archer, Faisal Manzoor, Jawad Ullah

Zitieren

APA

McCrickard, C., Boyd, A., Rodzen, K., Archer, E., Manzoor, F., & Ullah, J. (2025). PEEK/PEI Polymer Blends for Fused Filament Fabrication: Processing, Properties, and Printability. Polymers, 18(1), 113. https://doi.org/10.3390/polym18010113

Vancouver

McCrickard C, Boyd A, Rodzen K, Archer E, Manzoor F, Ullah J. PEEK/PEI Polymer Blends for Fused Filament Fabrication: Processing, Properties, and Printability. Polymers. 2025;18(1):113. doi:10.3390/polym18010113

BibTeX
@article{McCrickard2025,
  author = {McCrickard, Conor and Boyd, Adrian and Rodzen, Krzysztof and Archer, Edward and Manzoor, Faisal and Ullah, Jawad},
  title = {PEEK/PEI Polymer Blends for Fused Filament Fabrication: Processing, Properties, and Printability},
  journal = {Polymers},
  year = {2025},
  volume = {18},
  number = {1},
  pages = {113},
  doi = {10.3390/polym18010113}
}
Kostenlos starten →