EUVIMEDEUVIMED entdecken
Crossref

An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication

Zhaogui Wang, Xiuzeng Yin, Lihan Wang

High Performance Polymers · 2023-04 · 35 (3) · 276-294

DOI: 10.1177/09540083221126623 ↗

Kurz gefasst

Fachartikel in der Zeitschrift High Performance Polymers, online erschienen am 01.10.2022. Verfasst von Zhaogui Wang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Research Center for International Subsea and Engineering Technology and Equipment.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-temperature-resistant thermoplastics, e.g., Polyetheretherketone (PEEK) and Polyetherimide (PEI), exhibit much more superior material properties than conventional plastics. They are recently becoming favorable feedstock materials in Fused Filament Fabrication (FFF) 3D printing applications, which yields a low-cost and high-efficient approach providing complex parts and tooling. This paper fabricates the PEEK-PEI combined sandwich structures by properly alternating the fed material during FFF processes, aiming to combine the benefits of both materials. This is considered one of the first few attempts to prepare high-performance thermoplastics-based sandwich samples via the FFF method. The specimens are designed as three-layer and five-layer sandwiches (i.e., each “layer” contain a unique material). In addition, the printed samples are post-processed via a thermal annealing treatment. Experimental results show that the sandwich specimens exhibit higher surface quality than independently printed PEEK materials. The PEI material can be printed in 100% infill density in sandwich structures, while it can be rarely printed independently with infill densities exceeding 40%. Annealing may not enhance the mechanical properties of sandwich specimens while stabilizing their mechanical performances. Under the same PEEK/PEI volumetric ratio (i.e., 1:1), increasing the number of alternating stack layers improves the tensile strength of the sandwich specimens by up to 17%. The sandwich printing method is also cost-effective, such that the five-layer sandwich specimen provides competitive tensile performance as compared to the virgin PEEK material. At the same time, its cost is only ∼60% of all-PEEK specimens.

Förderung

  • National Natural Science Foundation of China
  • National Research Center for International Subsea and Engineering Technology and Equipment

Zitieren

APA

Wang, Z., Yin, X., & Wang, L. (2023). An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication. High Performance Polymers, 35(3), 276-294. https://doi.org/10.1177/09540083221126623

Vancouver

Wang Z, Yin X, Wang L. An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication. High Performance Polymers. 2023;35(3):276-294. doi:10.1177/09540083221126623

BibTeX
@article{Wang2023,
  author = {Wang, Zhaogui and Yin, Xiuzeng and Wang, Lihan},
  title = {An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication},
  journal = {High Performance Polymers},
  year = {2023},
  volume = {35},
  number = {3},
  pages = {276--294},
  doi = {10.1177/09540083221126623}
}
Kostenlos starten →