FDM 3D Printing and Properties of PBAT/PLA Blends
Polymers · 18.04.2024 · 16 (8) · 1140
DOI: 10.3390/polym16081140 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 18.04.2024. Verfasst von Wangwang Yu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation of the Jiangsu Province Precision Manufacturing Engineering and Technology Research Center.
Abstract (Originalsprache)
Biodegradable polylactic acid (PLA) has been widely used in fused deposition modeling (FDM) 3D printing. In order to improve its comprehensive properties in 3D printing, in this study, 0-40% content of polybutylene adipate terephthalate(PBAT) was selected to be blended with PLA in a twin-screw extruder; the resulting pellets were drawn into a homogeneous filament; then, PBAT/PLA samples were prepared by FDM 3D printing, and the effects of the dosage of PBAT on the mechanical properties, thermal behavior, surface wettability and melt flowability of the samples were investigated. The results showed that all the samples could be printed smoothly, and the ductility was slightly improved by the increase in the PBAT dosage; the thermal stability of PLA was enhanced by blending with PBAT, and the crystallinity increased monotonically with the increase in PBAT. After blending with PBAT, the surfaces of the samples were more hydrophilic and flowable. The important conclusion achieved in this work was that the PBAT/PLA blends, especially those containing 30%PBAT, showed great potential to replace petroleum-based plastics and are suitable for use in FDM 3D printing technologies for different applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
- Jiangsu Province Precision Manufacturing Engineering and Technology Research Center, Nanjing 210023, China.
- College of Science, Nanjing Forestry University, Nanjing 210037, China.
ORCID-Profile: Wangwang Yu
Förderung
- Foundation of the Jiangsu Province Precision Manufacturing Engineering and Technology Research Center
Zitieren
APA
Yu, W., Li, M., Lei, W., & Chen, Y. (2024). FDM 3D Printing and Properties of PBAT/PLA Blends. Polymers, 16(8), 1140. https://doi.org/10.3390/polym16081140
Vancouver
Yu W, Li M, Lei W, Chen Y. FDM 3D Printing and Properties of PBAT/PLA Blends. Polymers. 2024;16(8):1140. doi:10.3390/polym16081140
BibTeX
@article{Yu2024,
author = {Yu, Wangwang and Li, Mengya and Lei, Wen and Chen, Yong},
title = {FDM 3D Printing and Properties of PBAT/PLA Blends},
journal = {Polymers},
year = {2024},
volume = {16},
number = {8},
pages = {1140},
doi = {10.3390/polym16081140}
}
EUVIMED