EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biaxial Stretching of PBAT/PLA Blends for Improved Mechanical Properties

Nikki Rodriguez iD, Osnat Gillor, Murat Guvendiren iD, Lisa Axe

Polymers · 30.09.2025 · 17 (19) · 2651

DOI: 10.3390/polym17192651 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.09.2025. Verfasst von Nikki Rodriguez und 3 weiteren Autor:innen. Beteiligte Einrichtung: Otto H. York Chemical and Materials Engineering Department, New Jersey Institute of Technology, Newark, NJ 07102, USA. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: New Jersey Health Foundation, U.S. National Science Foundation, New Jersey Institute of Technology - Ben-Gurion University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable polymers offer a promising solution to the growing issue of global microplastic pollution. To effectively replace conventional plastics, it is essential to develop strategies for tuning the properties of biodegradable polymers without relying on additives. Biaxial stretching promotes anisotropic crystallization in polymer domains, thereby altering the mechanical performance of polymer blends. In this study, we employed a design of experiment (DoE) approach to investigate the effects of biaxial stretching at three drawing temperatures (Tds) and draw ratios (λs) on a biodegradable blend of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT), aiming to optimize both the strength and ductility. The DoE analysis revealed that the composition, the λ, the interaction between the λ and composition, and the interaction between the Td and composition significantly affect the elongation at break (εBreak). For the stress at break (σBreak), the most influential factors were the interaction between the λ and PLA concentration; a three-way interaction among the λ, PLA, and Td; the Td; the λ; and finally the PLA concentration alone. The optimal εBreak and σBreak were achieved at a λ = 5 × 5 and Td = 110 °C, with a composition of 10% PLA and 90% PBAT. The stretched samples exhibited higher crystallinity compared to the pressed samples across all compositions. This work demonstrates that in addition to the composition, the processing parameters, such as the λ and Td, critically influence the mechanical properties, enabling performance enhancements without the need for compatibilizers or toxic additives.

Schlagwörter

Stichwörter der Autor:innen

PBATPLAbiaxial stretchingbiodegradable polymersfilms

Autor:innen und Institutionen

  • Otto H. York Chemical and Materials Engineering Department, New Jersey Institute of Technology, Newark, NJ 07102, USA.
  • Zuckerberg Institute for Water Research, J. Blaustein Institutes for Desert Research, Ben Gurion University of the Negev, Midreshet Ben Gurion 8499000, Israel.
  • Department of Biomedical Engineering, New Jersey Institute of Technology, Newark, NJ 07102, USA.

ORCID-Profile: Nikki Rodriguez, Murat Guvendiren

Förderung

  • New Jersey Health Foundation
  • U.S. National Science Foundation
  • New Jersey Institute of Technology - Ben-Gurion University

Zitieren

APA

Rodriguez, N., Gillor, O., Guvendiren, M., & Axe, L. (2025). Biaxial Stretching of PBAT/PLA Blends for Improved Mechanical Properties. Polymers, 17(19), 2651. https://doi.org/10.3390/polym17192651

Vancouver

Rodriguez N, Gillor O, Guvendiren M, Axe L. Biaxial Stretching of PBAT/PLA Blends for Improved Mechanical Properties. Polymers. 2025;17(19):2651. doi:10.3390/polym17192651

BibTeX
@article{Rodriguez2025,
  author = {Rodriguez, Nikki and Gillor, Osnat and Guvendiren, Murat and Axe, Lisa},
  title = {Biaxial Stretching of PBAT/PLA Blends for Improved Mechanical Properties},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {19},
  pages = {2651},
  doi = {10.3390/polym17192651}
}
Kostenlos starten →