Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers: PLA, PBAT, and Blends
Polymers · 11.01.2023 · 15 (2) · 389
DOI: 10.3390/polym15020389 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.01.2023. Verfasst von Jonas Hufert und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institut für Kunststofftechnik, University of Stuttgart, Paffenwaldring 32, 70569 Stuttgart, Germany. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
Auxetic structures have a negative Poisson’s ratio and therefore expand transversely to the direction of loading instead of tapering. This unique behavior is not caused by the materials used, but by the structure, and thus offers completely new functionalities and design possibilities. As a rule, auxetic structures have a very complex geometry, which makes cost-effective production possible only by means of additive manufacturing processes. Due to the high design freedom of the strand deposition method, it makes sense to manufacture auxetic structures using this process. Therefore, in this project, polylactide acid (PLA), polybutylene adipate terephthalate (PBAT), and blends of the two polymers were produced and characterized. Filaments of the two polymers and a blend were extruded, processed into auxetic structures by strand deposition process (SDP), and investigated for their properties, primarily their Poisson’s ratio. The Poisson’s ratio was determined and the influence of the material on it was identified. A specific number of 5 × 5 unit cells has been found to be ideal for investigation. Dual printed specimens showed a similar auxetic behavior as the specimens made of pure PBAT. Likewise, multiple loading and unloading of the structure is possible. Furthermore, in-situ computed tomography revealed the detailed characterization of the initial state, including the warpage of the structures, damage, and traced auxetic behavior in detail.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institut für Kunststofftechnik, University of Stuttgart, Paffenwaldring 32, 70569 Stuttgart, Germany.
- Institute for Materials Testing, Materials Science and Strength of Materials, University of Stuttgart, Pfaffenwaldring 32, 70569 Stuttgart, Germany.
ORCID-Profile: Yanling Schneider, Siegfried Schmauder
Förderung
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Hufert, J., Grebhardt, A., Schneider, Y., Bonten, C., & Schmauder, S. (2023). Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers: PLA, PBAT, and Blends. Polymers, 15(2), 389. https://doi.org/10.3390/polym15020389
Vancouver
Hufert J, Grebhardt A, Schneider Y, Bonten C, Schmauder S. Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers: PLA, PBAT, and Blends. Polymers. 2023;15(2):389. doi:10.3390/polym15020389
BibTeX
@article{Hufert2023,
author = {Hufert, Jonas and Grebhardt, Axel and Schneider, Yanling and Bonten, Christian and Schmauder, Siegfried},
title = {Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers: PLA, PBAT, and Blends},
journal = {Polymers},
year = {2023},
volume = {15},
number = {2},
pages = {389},
doi = {10.3390/polym15020389}
}
EUVIMED