EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cashew Nutshells: A Promising Filler for 3D Printing Filaments

María José Paternina Reyes, Jimy Unfried Silgado, Juan Felipe Santa Marín iD, Henry Alonso Colorado Lopera iD, Luis Armando Espitia Sanjuán iD

Polymers · 07.11.2023 · 15 (22) · 4347

DOI: 10.3390/polym15224347 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.11.2023. Verfasst von María José Paternina Reyes und 4 weiteren Autor:innen. Beteiligte Einrichtung: Engineering, Science and Technology Research Group, Mechanical Engineering Department, University of Córdoba, Cr. 6 No. 76-103, Montería 230002, Córd…. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Córdoba, University of Cordoba.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cashew nutshells from the northern region of Colombia were prepared to assess their potential use as a filler in polymer matrix filaments for 3D printing. After drying and grinding processes, cashew nutshells were characterized using scanning electron microscopy (SEM), attenuated total reflectance Fourier-transform infrared (ATR-FTIR), and thermogravimetric analyses (TGA). Three different filaments were fabricated from polylactic acid pellets and cashew nutshell particles at 0.5, 1.0, and 2.0 weight percentages using a single-screw extruder. Subsequently, single-filament tensile tests were carried out on them. SEM images showed rough and porous particles composed of an arrangement of cellulose microfibrils embedded in a hemicellulose and lignin matrix, the typical microstructure reported for natural fibers. These characteristics observed in the particles are favorable for improving filler–matrix adhesion in polymer matrix composites. In addition, their low density of 0.337 g/cm3 makes them attractive for lightweight applications. ATR-FTIR spectra exhibited specific functional groups attributed to hemicellulose, cellulose, and lignin, as well as a possible transformation to crystalline cellulose during drying treatment. According to TGA analyses, the thermal stability of cashew nutshell particles is around 320 °C. The three polylactic acid–cashew nutshell particle filaments prepared in this work showed higher tensile strength and elongation at break when compared to polylactic acid filament. The characteristics displayed by these cashew nutshell particles make them a promising filler for 3D printing filaments.

Schlagwörter

Stichwörter der Autor:innen

3D printing filamentcashew nutshell particlesnatural fiber-reinforced polymers

Autor:innen und Institutionen

  • Engineering, Science and Technology Research Group, Mechanical Engineering Department, University of Córdoba, Cr. 6 No. 76-103, Montería 230002, Córdoba, Colombia.
  • Grupo de Investigación Materiales Avanzados y Energía-MATyER, Instituto Tecnológico Metropolitano, Medellín 050012, Antioquia, Colombia.
  • CCComposites Laboratory, University of Antioquia, Calle 67 No. 53-108, Medellín 050010, Antioquia, Colombia.

ORCID-Profile: Juan Felipe Santa Marín, Henry Alonso Colorado Lopera, Luis Armando Espitia Sanjuán

Förderung

  • University of Córdoba
  • University of Cordoba

Zitieren

APA

Paternina Reyes, M. J., Unfried Silgado, J., Santa Marín, J. F., Colorado Lopera, H. A., & Espitia Sanjuán, L. A. (2023). Cashew Nutshells: A Promising Filler for 3D Printing Filaments. Polymers, 15(22), 4347. https://doi.org/10.3390/polym15224347

Vancouver

Paternina Reyes MJ, Unfried Silgado J, Santa Marín JF, Colorado Lopera HA, Espitia Sanjuán LA. Cashew Nutshells: A Promising Filler for 3D Printing Filaments. Polymers. 2023;15(22):4347. doi:10.3390/polym15224347

BibTeX
@article{PaterninaReyes2023,
  author = {Paternina Reyes, María José and Unfried Silgado, Jimy and Santa Marín, Juan Felipe and Colorado Lopera, Henry Alonso and Espitia Sanjuán, Luis Armando},
  title = {Cashew Nutshells: A Promising Filler for 3D Printing Filaments},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {22},
  pages = {4347},
  doi = {10.3390/polym15224347}
}
Kostenlos starten →