EUVIMEDEUVIMED entdecken
Crossref

Development of fish scale particle reinforced PLA filaments for 3D printing applications

A. Joseph Arockiam, S. Rajesh, S. Karthikeyan

Journal of Applied Polymer Science · 20.03.2024 · 141 (12)

DOI: 10.1002/app.55132 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 27.12.2023. Verfasst von A. Joseph Arockiam und 2 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 43 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated incorporating fish scale powder (FSP) as a bio‐filler into polylactic acid (PLA) raw material for polymeric 3D printing. The PLA/FSP filaments were evaluated for various properties (tensile strength, tensile modulus, elongation, diameter deviation, thermogravimetric analysis, surface roughness, and SEM analysis) at different compositions (PLA, PLA/FSP10, PLA/FSP20, and PLA/FSP30 wt%). The results revealed that PLA filaments reinforced with 20 wt% FSP achieved the highest tensile strength, and modulus is 44.49 MPa and 2.83 GPa. The filaments reinforced with neat PLA and PLA with 10 wt% fish scale powder exhibited minor diameter deviations of +0.002 and −0.002. The surface roughness of the neat PLA filament is notably higher, registering a value of 1.459 μm. This finding highlights the importance of considering surface characteristics in filament selection for 3D printing applications. The microscopic analysis confirmed a uniform distribution of FSP particles in the 20 wt% composition PLA/FSP filaments. These results suggest that PLA/FSP (20 wt%) is an optimal feedstock for 3D printing, especially in developing biomaterials like bio‐scaffolds.

Zitieren

APA

Arockiam, A. J., Rajesh, S., & Karthikeyan, S. (2024). Development of fish scale particle reinforced PLA filaments for 3D printing applications. Journal of Applied Polymer Science, 141(12). https://doi.org/10.1002/app.55132

Vancouver

Arockiam AJ, Rajesh S, Karthikeyan S. Development of fish scale particle reinforced PLA filaments for 3D printing applications. Journal of Applied Polymer Science. 2024;141(12). doi:10.1002/app.55132

BibTeX
@article{Arockiam2024,
  author = {Arockiam, A. Joseph and Rajesh, S. and Karthikeyan, S.},
  title = {Development of fish scale particle reinforced PLA filaments for 3D printing applications},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {12},
  doi = {10.1002/app.55132}
}
Kostenlos starten →