A Review of Natural Fiber-Based Filaments for 3D Printing: Filament Fabrication and Characterization
Materials · 29.05.2023 · 16 (11) · 4052
DOI: 10.3390/ma16114052 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 29.05.2023. Verfasst von Mohd Nazri Ahmad und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia. Die Arbeit wurde bisher 97-mal zitiert (Crossref) und nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: universiti putra malaysia, Fundamental Research Grant Scheme (FRGS).
Abstract (Originalsprache)
Today, additive manufacturing (AM) is the most recent technology used to produce detailed and complexly built parts for a variety of applications. The most emphasis has been given to fused deposition modeling (FDM) in the development and manufacturing fields. Natural fibers have received attention in the area of 3D printing to be employed as bio-filters with thermoplastics, which have prompted an effort for more ecologically acceptable methods of manufacturing. The development of natural fiber composite filaments for FDM requires meticulous methods and in-depth knowledge of the properties of natural fibers and their matrices. Thus, this paper reviews natural fiber-based 3D printing filaments. It covers the fabrication method and characterization of thermoplastic materials blended with natural fiber-produced wire filament. The characterization of wire filament includes the mechanical properties, dimension stability, morphological study, and surface quality. There is also a discussion of the difficulties in developing a natural fiber composite filament. Last but not least, the prospects of natural fiber-based filaments for FDM 3D printing are also discussed. It is hoped that, after reading this article, readers will have enough knowledge regarding how natural fiber composite filament for FDM is created.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Faculty of Mechanical and Manufacturing Engineering Technology, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal 76100, Melaka, Malaysia.
- Centre of Smart System and Innovative Design, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal 76100, Melaka, Malaysia.
- Aerospace Malaysia Research Centre (AMRC), Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
- Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
ORCID-Profile: Mohd Nazri Ahmad, Mastura Mohammad Taha, Zulkiflle Leman
Förderung
- universiti putra malaysia
- Fundamental Research Grant Scheme (FRGS)
Zitieren
APA
Ahmad, M. N., Ishak, M. R., Mohammad Taha, M., Mustapha, F., & Leman, Z. (2023). A Review of Natural Fiber-Based Filaments for 3D Printing: Filament Fabrication and Characterization. Materials, 16(11), 4052. https://doi.org/10.3390/ma16114052
Vancouver
Ahmad MN, Ishak MR, Mohammad Taha M, Mustapha F, Leman Z. A Review of Natural Fiber-Based Filaments for 3D Printing: Filament Fabrication and Characterization. Materials. 2023;16(11):4052. doi:10.3390/ma16114052
BibTeX
@article{Ahmad2023,
author = {Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle},
title = {A Review of Natural Fiber-Based Filaments for 3D Printing: Filament Fabrication and Characterization},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {4052},
doi = {10.3390/ma16114052}
}
EUVIMED