EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Single-Screw Extrusion Process Using Polylactide

Mariusz Fabijański iD

Polymers · 25.09.2023 · 15 (19) · 3878

DOI: 10.3390/polym15193878 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.09.2023. Verfasst von Mariusz Fabijański. Beteiligte Einrichtung: Plastics Processing Department, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, 85 Narbutta Street, 02-524 Warsaw,…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the extrusion process while using a single-screw extruder and polylactide (PLA). This material belongs to the so-called biodegradable plastics, and is characterized by a higher density compared to typical polymeric materials used to manufacture products in this technology. Various polyethylenes and polypropylenes and their derivatives are commonly used. An evaluation of the extrusion process was carried out for various extruder operating parameters. The rotational speed of the screw and the process temperature were changed. For each rotational speed of the screw, the following readings were made: changes in temperature, active power, current intensity, pressure, and mass of extruded plastics each time.

Schlagwörter

Stichwörter der Autor:innen

PLAplastic extrusionpolylactideprocess analysis

Autor:innen und Institutionen

  • Plastics Processing Department, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, 85 Narbutta Street, 02-524 Warsaw, Poland.

ORCID-Profile: Mariusz Fabijański

Zitieren

APA

Fabijański, M. (2023). Study of the Single-Screw Extrusion Process Using Polylactide. Polymers, 15(19), 3878. https://doi.org/10.3390/polym15193878

Vancouver

Fabijański M. Study of the Single-Screw Extrusion Process Using Polylactide. Polymers. 2023;15(19):3878. doi:10.3390/polym15193878

BibTeX
@article{Fabijaski2023,
  author = {Fabijański, Mariusz},
  title = {Study of the Single-Screw Extrusion Process Using Polylactide},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {19},
  pages = {3878},
  doi = {10.3390/polym15193878}
}
Kostenlos starten →