EUVIMEDEUVIMED entdecken
Crossref

Effect of Processing Conditions on Process‐Induced Degradation of Poly(Lactic Acid) During Single‐Screw Extrusion

Ineke Velghe, Bart Buffel, Veerle Vandeginste, Wim Thielemans, Frederik Desplentere

Journal of Applied Polymer Science · 10.04.2025 · 142 (14)

DOI: 10.1002/app.56698 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 18.01.2025. Verfasst von Ineke Velghe und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: Fonds Wetenschappelijk Onderzoek.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study is to investigate the effect of processing conditions on the degradation of poly(lactic acid) (PLA) during single‐screw extrusion. A 2 5 full factorial design of experiments was used to systematically screen significant main and interaction effects caused by five processing conditions: the moisture content in the granules (dried–undried), processing temperature (190°C–230°C), length of the compression zone of the screw (6D–11D), diameter of the capillary die (2–4 mm), and screw rotation speed (20–40 rpm). The effect of 32 extrusion combinations on the molecular weight of PLA (102,850 Da) was statistically analyzed. The molecular weight after processing varied between 100,750 and 66,500 Da and was determined by four main effects and three interaction effects. A high moisture content had the largest effect (−17,846 Da), followed by a high processing temperature of 230°C (−7260 Da), a small die diameter of 2 mm (−1849 Da) and a low screw rotation speed of 20 rpm (−4730 Da). Aside from main effects, the importance of studying interaction effects was emphasized, since the moisture content influenced degradation caused by temperature (−4019 Da), screw speed (4621 Da), and die geometry (1993 Da).

Förderung

  • Fonds Wetenschappelijk Onderzoek

Zitieren

APA

Velghe, I., Buffel, B., Vandeginste, V., Thielemans, W., & Desplentere, F. (2025). Effect of Processing Conditions on Process‐Induced Degradation of Poly(Lactic Acid) During Single‐Screw Extrusion. Journal of Applied Polymer Science, 142(14). https://doi.org/10.1002/app.56698

Vancouver

Velghe I, Buffel B, Vandeginste V, Thielemans W, Desplentere F. Effect of Processing Conditions on Process‐Induced Degradation of Poly(Lactic Acid) During Single‐Screw Extrusion. Journal of Applied Polymer Science. 2025;142(14). doi:10.1002/app.56698

BibTeX
@article{Velghe2025,
  author = {Velghe, Ineke and Buffel, Bart and Vandeginste, Veerle and Thielemans, Wim and Desplentere, Frederik},
  title = {Effect of Processing Conditions on Process‐Induced Degradation of Poly(Lactic Acid) During Single‐Screw Extrusion},
  journal = {Journal of Applied Polymer Science},
  year = {2025},
  volume = {142},
  number = {14},
  doi = {10.1002/app.56698}
}
Kostenlos starten →