Pressure-Based Feedback Control for Reducing Extrusion Pulsation in a Single-Screw Direct-Extrusion 3D Printer
Journal of Manufacturing and Materials Processing · 01.11.2026 · 10 (11) · 461
DOI: 10.3390/jmmp10110461 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 01.11.2026. Verfasst von Jan-Uwe R. Schmidt und 6 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Weight- and cost-optimized extruders are used in additive manufacturing. Material-flow pulsation is a major challenge in screw-based material extrusion additive manufacturing, as it reduces dimensional accuracy and print quality. This study investigates the relationship between internal nozzle pressure and material flow in a polymer-feeding single-screw extruder and evaluates pressure-based closed-loop control as a means of reducing extrusion pulsation. An experimental setup comprising an integrated nozzle-pressure sensor, a synchronized conveyor belt, and a laser-line scanner was developed to simultaneously measure nozzle pressure and the cross-sectional area of the extruded strand. Based on volumetric setpoints derived from the G-code, corrected extruder motor commands were generated and implemented using proportional (P) and proportional–integral (PI) pressure control. The experimental results reveal a strong correlation between internal nozzle pressure and the resulting strand cross-section. The strand modulation correlated with screw rotation could be almost completely eliminated. At the investigated medium extrusion speed, pressure feedback reduced the remaining strand cross-sectional modulation to approximately 33% of the uncontrolled reference condition. Using PLA (Polylactic Acid) material the presented approach demonstrates that pressure-based feedback control is a practical method for improving process stability and extrusion quality in screw-based additive manufacturing and provides a foundation for future advanced control strategies.
Zitieren
APA
Schmidt, J. R., Jähnicke, J., Brühl, S., Keimer, R., Titze, M., Monner, H. P., & Zeidler, H. (2026). Pressure-Based Feedback Control for Reducing Extrusion Pulsation in a Single-Screw Direct-Extrusion 3D Printer. Journal of Manufacturing and Materials Processing, 10(11), 461. https://doi.org/10.3390/jmmp10110461
Vancouver
Schmidt JR, Jähnicke J, Brühl S, Keimer R, Titze M, Monner HP, et al. Pressure-Based Feedback Control for Reducing Extrusion Pulsation in a Single-Screw Direct-Extrusion 3D Printer. Journal of Manufacturing and Materials Processing. 2026;10(11):461. doi:10.3390/jmmp10110461
BibTeX
@article{Schmidt2026,
author = {Schmidt, Jan-Uwe R. and Jähnicke, Jens and Brühl, Sebastian and Keimer, Ralf and Titze, Maik and Monner, Hans Peter and Zeidler, Henning},
title = {Pressure-Based Feedback Control for Reducing Extrusion Pulsation in a Single-Screw Direct-Extrusion 3D Printer},
journal = {Journal of Manufacturing and Materials Processing},
year = {2026},
volume = {10},
number = {11},
pages = {461},
doi = {10.3390/jmmp10110461}
}
EUVIMED