SUSTAINABLE CONDUCTIVE RPLA-CARBON BLACK FILAMENT FOR ADDITIVE MANUFACTURING VIA SINGLE-SCREW EXTRUSION
ASEAN Journal on Science and Technology for Development · 01.01.2026 · 43 (2)
DOI: 10.61931/2224-9028.1669 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASEAN Journal on Science and Technology for Development, online erschienen am 01.01.2026. Verfasst von Zaidan Faraby Zulkarnain und 7 weiteren Autor:innen.
Abstract (Originalsprache)
The growing demand for low-cost, sustainable conductive filaments for additive manufacturing motivates the exploration of recycled polymer feedstocks as alternatives to virgin materials. However, the effects of prior thermal reprocessing on both the electrical performance and morphological integrity of recycled PLA (rPLA)–carbon black (CB) composite filaments remain insufficiently characterised, particularly under single-screw extrusion conditions. This study fabricates and characterises conductive filaments from virgin PLA and rPLA, each loaded with CB at 0.2, 0.6, and 1.0 wt%, using a low-cost desktop single-screw extruder. Melt blending was found to be essential for achieving continuous filament extrusion, as ball milling produced insufficient filler dispersion and frequent nozzle jamming. Electrical conductivity increased markedly with CB content, with both systems approaching percolation onset at 1.0 wt%, where conductivity reached 0.369 mS/m for PLA-CB and 0.362 mS/m for rPLA-CB. SEM and EDX analyses revealed that rPLA exhibited incomplete cross-sectional filling and a higher surface O/C ratio, both consistent with chain-scission-induced molecular degradation while quantitative agglomerate size analysis showed rPLA-CB produced larger and more heterogeneously distributed CB clusters compared to PLA-CB. Despite these microstructural differences, rPLA-CB achieved comparable electrical performance to its virgin counterpart, demonstrating its viability as a sustainable feedstock for semiconductive and antistatic additive manufacturing applications.
Zitieren
APA
Zulkarnain, Z. F., Hawapi, S., Kadir, A. Z. A., Maulana, M. I. I. M., Fadil, N. A., Mas’ood, N. N., Alkahari, M. R., & Wahab, S. (2026). SUSTAINABLE CONDUCTIVE RPLA-CARBON BLACK FILAMENT FOR ADDITIVE MANUFACTURING VIA SINGLE-SCREW EXTRUSION. ASEAN Journal on Science and Technology for Development, 43(2). https://doi.org/10.61931/2224-9028.1669
Vancouver
Zulkarnain ZF, Hawapi S, Kadir AZA, Maulana MIIM, Fadil NA, Mas’ood NN, et al. SUSTAINABLE CONDUCTIVE RPLA-CARBON BLACK FILAMENT FOR ADDITIVE MANUFACTURING VIA SINGLE-SCREW EXTRUSION. ASEAN Journal on Science and Technology for Development. 2026;43(2). doi:10.61931/2224-9028.1669
BibTeX
@article{Zulkarnain2026,
author = {Zulkarnain, Zaidan Faraby and Hawapi, Shakina and Kadir, Aini Zuhra Abdul and Maulana, Muhd Ikmal Isyraf Mohd and Fadil, Nor Akmal and Mas’ood, Najlaa Nazihah and Alkahari, Mohd Rizal and Wahab, Saidin},
title = {SUSTAINABLE CONDUCTIVE RPLA-CARBON BLACK FILAMENT FOR ADDITIVE MANUFACTURING VIA SINGLE-SCREW EXTRUSION},
journal = {ASEAN Journal on Science and Technology for Development},
year = {2026},
volume = {43},
number = {2},
doi = {10.61931/2224-9028.1669}
}
EUVIMED