EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Property Characterization of Virgin and Recycled PLA Blends in Single-Screw Filament Extrusion for 3D Printing

Reem Aly iD, Olafisoye Olalere, Aaron Ryder, Mozah Alyammahi iD, Wael A Samad iD

Polymers · 20.12.2024 · 16 (24) · 3569

DOI: 10.3390/polym16243569 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.12.2024. Verfasst von Reem Aly und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical & Industrial Engineering, Rochester Institute of Technology, Dubai 341055, United Arab Emirates. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Dubai Electricity & Water Authority, Dubai Electricity and Water Authority.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing is an attractive technology due to its versatility in producing parts with diverse properties from a single material. However, the process often generates plastic waste, particularly from failed prints, making sustainability a growing concern. Recycling this waste material presents a potential solution for reducing environmental impact while creating new, functional parts. In this study, the feasibility of creating printable filaments from recycled polylactic acid (PLA) waste and virgin PLA pellets was explored. Filaments were manufactured in the lab using a single-screw desktop extruder with four temperature zones, with compositions ranging from 100% virgin PLA to 100% recycled PLA in 10% composition increments. Test samples were 3D printed using a Material Extrusion 3D printer and subjected to tensile testing in conjunction with digital image correlation to evaluate their ultimate tensile strength, yield strength, Young’s modulus, ductility, toughness, and strain distribution. The results indicated that the optimal mechanical properties were observed in specimens made from 100% virgin PLA, 100% recycled PLA, and a 50% virgin/50% recycled PLA blend. Additionally, comparisons with a commercially produced PLA filament revealed that 100% virgin and 100% recycled blends have a 50.33% and 48% higher tensile strength than commercial filament, respectively. However, commercial filaments exhibited higher ductility and toughness than the lab-made extruded filament.

Schlagwörter

Stichwörter der Autor:innen

3D printingextrusionfilament makingmechanical testingpolylactic acidrecycling

Autor:innen und Institutionen

  • Department of Mechanical & Industrial Engineering, Rochester Institute of Technology, Dubai 341055, United Arab Emirates.
  • Department of Mechanical Engineering, Rochester Institute of Technology, Rochester, NY 14623, USA.
  • R&D Technologist Dubai Electricity & Water Authority, Dubai 341055, United Arab Emirates.

ORCID-Profile: Reem Aly, Mozah Alyammahi, Wael A Samad

Förderung

  • Dubai Electricity & Water Authority
  • Dubai Electricity and Water Authority

Zitieren

APA

Aly, R., Olalere, O., Ryder, A., Alyammahi, M., & Samad, W. A. (2024). Mechanical Property Characterization of Virgin and Recycled PLA Blends in Single-Screw Filament Extrusion for 3D Printing. Polymers, 16(24), 3569. https://doi.org/10.3390/polym16243569

Vancouver

Aly R, Olalere O, Ryder A, Alyammahi M, Samad WA. Mechanical Property Characterization of Virgin and Recycled PLA Blends in Single-Screw Filament Extrusion for 3D Printing. Polymers. 2024;16(24):3569. doi:10.3390/polym16243569

BibTeX
@article{Aly2024,
  author = {Aly, Reem and Olalere, Olafisoye and Ryder, Aaron and Alyammahi, Mozah and Samad, Wael A},
  title = {Mechanical Property Characterization of Virgin and Recycled PLA Blends in Single-Screw Filament Extrusion for 3D Printing},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {24},
  pages = {3569},
  doi = {10.3390/polym16243569}
}
Kostenlos starten →