EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Printing Layer Thickness and Orientation on the Mechanical Properties of DLP 3D-Printed Dental Resin

Andrei Zoltan Farkas iD, Sergiu-Valentin Galatanu iD, Riham Nagib

Polymers · 23.02.2023 · 15 (5) · 1113

DOI: 10.3390/polym15051113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.02.2023. Verfasst von Andrei Zoltan Farkas und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechatronics, Polytechnic University of Timisoara, 1 Mihai Viteazul Blvd., 300222 Timisoara, Romania. Die Arbeit wurde bisher 108-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Technological advances are closely related to the development of new materials and their processing and manufacturing technologies. In the dental field, the high complexity of the geometrical designs of crowns, bridges and other applications of digital light processing 3D-printable biocompatible resins is the reason for the need for a deep understanding of the mechanical proprieties and behavior of these materials. The aim of the present study is to assess the influence of printing layer direction and thickness on the tensile and compression proprieties of a DLP 3D-printable dental resin. Using the NextDent C&B Micro-Filled Hybrid (MFH), 36 specimens (24 for tensile strength testing, 12 for compression testing) were printed at different layer angulations (0°, 45° and 90°) and layer thicknesses (0.1 mm and 0.05 mm). Brittle behavior was observed in all specimens regardless of the direction of printing and layer thickness for the tensile specimens. The highest tensile values were obtained for specimens printed with a layer thickness of 0.05 mm. In conclusion, both printing layer direction and thickness influence mechanical proprieties and can be used to alter the materials’ characteristics and make the final printed product more suitable for its intended purposes.

Schlagwörter

Stichwörter der Autor:innen

3D printingC&B Micro Filled Hybridcompression testdental resintensile test

Autor:innen und Institutionen

  • Department of Mechatronics, Polytechnic University of Timisoara, 1 Mihai Viteazul Blvd., 300222 Timisoara, Romania.
  • Department of Mechanics and Strength of Materials, Politehnica University of Timisoara, 1 Mihai Viteazu Blvd., 300222 Timisoara, Romania.
  • Orthodontics Research Center 'ORTHO CENTER', Department of Orthodontics, "Victor Babes" University of Medicine and Pharmacy Timisoara, Eftimie Murgu Sq. 2, 300041 Timisoara, Romania.

ORCID-Profile: Andrei Zoltan Farkas, Sergiu-Valentin Galatanu

Zitieren

APA

Farkas, A. Z., Galatanu, S. V., & Nagib, R. (2023). The Influence of Printing Layer Thickness and Orientation on the Mechanical Properties of DLP 3D-Printed Dental Resin. Polymers, 15(5), 1113. https://doi.org/10.3390/polym15051113

Vancouver

Farkas AZ, Galatanu SV, Nagib R. The Influence of Printing Layer Thickness and Orientation on the Mechanical Properties of DLP 3D-Printed Dental Resin. Polymers. 2023;15(5):1113. doi:10.3390/polym15051113

BibTeX
@article{Farkas2023,
  author = {Farkas, Andrei Zoltan and Galatanu, Sergiu-Valentin and Nagib, Riham},
  title = {The Influence of Printing Layer Thickness and Orientation on the Mechanical Properties of DLP 3D-Printed Dental Resin},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1113},
  doi = {10.3390/polym15051113}
}
Kostenlos starten →