EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Printing Orientation and Post-Curing Time on the Mechanical Properties of 3D-Printed Denture Base Resin

Ivet Dzhondrova iD, Ilia Liondev iD, Iva Taneva, Todor Bogdanov iD, Todor Uzunov iD, Dimitar Kirov iD

Journal of Functional Biomaterials · 19.12.2025 · 17 (1) · 1

DOI: 10.3390/jfb17010001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 19.12.2025. Verfasst von Ivet Dzhondrova und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University of Sofia, 1000 Sofia, Bulgaria. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union-NextGenerationEU, the European Union-NextGenerationEU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing is increasingly integrated into dental technology, yet the mechanical performance of 3D-printed denture base resins remains strongly influenced by printing orientation and post-curing duration. This study evaluated the combined effect of three printing orientations (0°, 45°, 90°) and three post-curing times (30, 45, 60 min) on the flexural strength and surface microhardness of a denture base resin. Specimens designed in Blender and fabricated using NextDent Denture 3D+ resin were subjected to three-point bending tests (n = 5 per group) and Vickers microhardness measurements (n = 10 per group). One-way ANOVA assessed main and interaction effects. Printing orientation had a significant influence on flexural strength, with horizontally printed specimens exhibiting the highest values, whereas vertically printed specimens were consistently weaker. Post-curing time did not significantly affect flexural strength within any orientation. In contrast, microhardness increased progressively with longer post-curing durations, regardless of orientation, indicating continued surface polymerisation. Because flexural strength and hardness responded differently to curing duration, no single post-curing time was universally optimal; however, 0° printing consistently produced the strongest specimens for this resin–printer system. This trade-off is clinically relevant, because dentures require high flexural strength to resist fracture and sufficient hardness to minimise wear.

Schlagwörter

Stichwörter der Autor:innen

CAD/CAMadditive manufacturingbuild angleflexural strengthmicrohardnessphotopolymer resinpost-polymerization

Autor:innen und Institutionen

  • Department of Prosthetic Dental Medicine, Faculty of Dental Medicine, Medical University of Sofia, 1000 Sofia, Bulgaria.
  • Department of Physics and Biophysics, Medical University of Sofia, 1000 Sofia, Bulgaria.

ORCID-Profile: Ivet Dzhondrova, Ilia Liondev, Todor Bogdanov, Todor Uzunov, Dimitar Kirov

Förderung

  • European Union-NextGenerationEU
  • the European Union-NextGenerationEU

Zitieren

APA

Dzhondrova, I., Liondev, I., Taneva, I., Bogdanov, T., Uzunov, T., & Kirov, D. (2025). Effect of Printing Orientation and Post-Curing Time on the Mechanical Properties of 3D-Printed Denture Base Resin. Journal of Functional Biomaterials, 17(1), 1. https://doi.org/10.3390/jfb17010001

Vancouver

Dzhondrova I, Liondev I, Taneva I, Bogdanov T, Uzunov T, Kirov D. Effect of Printing Orientation and Post-Curing Time on the Mechanical Properties of 3D-Printed Denture Base Resin. Journal of Functional Biomaterials. 2025;17(1):1. doi:10.3390/jfb17010001

BibTeX
@article{Dzhondrova2025,
  author = {Dzhondrova, Ivet and Liondev, Ilia and Taneva, Iva and Bogdanov, Todor and Uzunov, Todor and Kirov, Dimitar},
  title = {Effect of Printing Orientation and Post-Curing Time on the Mechanical Properties of 3D-Printed Denture Base Resin},
  journal = {Journal of Functional Biomaterials},
  year = {2025},
  volume = {17},
  number = {1},
  pages = {1},
  doi = {10.3390/jfb17010001}
}
Kostenlos starten →