Process Research of Surface Laser Phase Transformation Hardening for 42CrMo Material
Photonics · 22.12.2024 · 11 (12) · 1205
DOI: 10.3390/photonics11121205 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics, online erschienen am 22.12.2024. Verfasst von Peiyu He und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangsu Province Natural Science Foundation, Jiangsu Province’s “Blue Project”.
Abstract (Originalsprache)
42CrMo is an ultra-high-strength, low-alloy structural steel. To enhance its surface wear resistance and prolong the service life of components, surface strengthening techniques are commonly applied. In this study, a numerical model for the laser phase transformation hardening of 42CrMo was established. The temperature field and metallurgical transformations during the laser phase transformation hardening process were investigated through numerical simulation, and the morphology of the hardened layer after laser surface treatment was predicted. The effects of key process parameters on the temperature field and the characteristics of the hardened layer were identified. The optimal parameters for single-pass laser phase transformation hardening were found to be a laser power of 1200 W, a scanning speed of 20 mm/s, and a spot diameter of 6 mm. The accuracy of the simulation results was validated through laser phase transformation hardening experiments. The results indicate that under these optimal conditions—laser power of 1200 W and a scanning speed of 20 mm/s—the hardening effect is maximized. The surface hardness reaches a maximum of 782 HV0.2, with a cross-sectional hardness peaking at 875 HV0.2, which is three to four times higher than the base material’s hardness, with an average surface hardness of 745 HV0.2.
Förderung
- National Natural Science Foundation of China
- Jiangsu Province Natural Science Foundation
- Jiangsu Province’s “Blue Project”
- China Postdoctoral Science Foundation
Zitieren
APA
He, P., Ding, Y., Hu, X., Qian, L., Wang, Y., & Li, F. (2024). Process Research of Surface Laser Phase Transformation Hardening for 42CrMo Material. Photonics, 11(12), 1205. https://doi.org/10.3390/photonics11121205
Vancouver
He P, Ding Y, Hu X, Qian L, Wang Y, Li F. Process Research of Surface Laser Phase Transformation Hardening for 42CrMo Material. Photonics. 2024;11(12):1205. doi:10.3390/photonics11121205
BibTeX
@article{He2024,
author = {He, Peiyu and Ding, Yi and Hu, Xinyao and Qian, Liming and Wang, Yun and Li, Fuzhu},
title = {Process Research of Surface Laser Phase Transformation Hardening for 42CrMo Material},
journal = {Photonics},
year = {2024},
volume = {11},
number = {12},
pages = {1205},
doi = {10.3390/photonics11121205}
}
EUVIMED