Laser Surface Hardening of Carburized Steels: A Review of Process Parameters and Application in Gear Manufacturing
Materials · 01.08.2025 · 18 (15) · 3623
DOI: 10.3390/ma18153623 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 01.08.2025. Verfasst von Janusz Kluczyński und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Robots and Machine Design, Faculty of Mechanical Engineering, Military University of Technology, 00-908 Warsaw, Poland. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development, Military University of Technology in Warsaw, Polish National Center for Research and Development.
Abstract (Originalsprache)
This article provides a comprehensive overview of recent studies concerning laser heat treatment (LHT) of structural and tool steels, with particular attention to the 21NiCrMo2 steel used for carburized gear wheels. Analysis includes the influence of critical laser processing conditions—including power output, motion speed, spot size, and focusing distance—on surface microhardness, hardening depth, and microstructure development. The findings indicate that the energy density is the dominant factor that affects the outcomes of LHT. Optimal results, in the form of a high surface microhardness and a sufficient depth of hardening, were achieved within the energy density range of 80–130 J/mm2, allowing for martensitic transformation while avoiding defects such as melting or cracking. At densities below 50 J/mm2, incomplete hardening occurred with minimal microhardness improvement. On the contrary, densities exceeding 150–180 J/mm2 caused surface overheating and degradation. For carburized 21NiCrMo2 steel, the most effective parameters included 450–1050 W laser power, 1.7–2.5 mm/s scanning speed, and 2.0–2.3 mm beam diameter. The review confirms that process control through energy-based parameters allows for reliable prediction and optimization of LHT for industrial applications, particularly in components exposed to cyclic loads.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Robots and Machine Design, Faculty of Mechanical Engineering, Military University of Technology, 00-908 Warsaw, Poland.
ORCID-Profile: Janusz Kluczyński, Katarzyna Jasik, Jakub Łuszczek
Förderung
- National Centre for Research and Development
- Military University of Technology in Warsaw
- Polish National Center for Research and Development
Zitieren
APA
Kluczyński, J., Jasik, K., Łuszczek, J., & Pokropek, J. (2025). Laser Surface Hardening of Carburized Steels: A Review of Process Parameters and Application in Gear Manufacturing. Materials, 18(15), 3623. https://doi.org/10.3390/ma18153623
Vancouver
Kluczyński J, Jasik K, Łuszczek J, Pokropek J. Laser Surface Hardening of Carburized Steels: A Review of Process Parameters and Application in Gear Manufacturing. Materials. 2025;18(15):3623. doi:10.3390/ma18153623
BibTeX
@article{Kluczyski2025,
author = {Kluczyński, Janusz and Jasik, Katarzyna and Łuszczek, Jakub and Pokropek, Jakub},
title = {Laser Surface Hardening of Carburized Steels: A Review of Process Parameters and Application in Gear Manufacturing},
journal = {Materials},
year = {2025},
volume = {18},
number = {15},
pages = {3623},
doi = {10.3390/ma18153623}
}
EUVIMED