EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Microstructural evolution of 42CrMo steel during isothermal transformation

Yanning Liu, Chunfang Wang, Jikang Li, Zhaobo Wu

Discover Metals · 29.10.2026 · 59 (1)

DOI: 10.1007/s13404-026-00378-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Discover Metals, online erschienen am 29.10.2026. Verfasst von Yanning Liu und 3 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Central Iron and Steel Research Institute R&D special fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The isothermal phase-transformation behaviour of commercial rolled 42CrMo medium-carbon Cr-Mo alloy steel was systematically investigated over a broad temperature range of 350–725 °C using Gleeble-3800 thermomechanical simulation, combined with optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron back-scatter diffraction (EBSD), and X-ray diffraction (XRD). The ferrite-pearlite microstructure forms at 625–675 °C, exhibiting polygonal ferrite and lamellar pearlite. Within the bainite transformation regime (350–475 °C), typical morphological transition from lower bainite to upper bainite was observed: specimens isothermally held at 400 °C show fine acicular bainite with carbide-like features inside ferrite laths, whereas samples transformed at 450 °C develop sheaf-type upper bainite with carbide-like precipitates distributed along lath boundaries. EBSD characterization reveals non-monotonic evolution of ferritic orientation-domain size and grain-boundary misorientation distribution across the bainite transformation temperature window. The area-weighted equivalent circular diameter (ECD) of BCC orientation domains reaches maximum near 450 °C, while the fraction of 2–15° low-angle grain boundaries achieves its maximum value at 425 °C. TEM-EDS characterisation confirms ubiquitous existence of TiN inclusions; MnS particles are frequently observed adjacent to TiN in lower-bainite specimens, and these particles are inherited from steel-making solidification process rather than precipitated during isothermal bainite transformation. XRD phase screening demonstrates that bcc/bct ferritic matrix dominates the microstructure for samples treated between 400 and 450 °C, and retained austenite is only present as a minor constituent below the reliable quantitative detection limit of the current experimental setup. This work quantitatively clarifies the temperature-dependent microstructural evolution law of isothermally transformed 42CrMo steel, provides experimental reference for heat-treatment process optimisation of this widely used engineering steel.

Förderung

  • Central Iron and Steel Research Institute R&D special fund

Zitieren

APA

Liu, Y., Wang, C., Li, J., & Wu, Z. (2026). Microstructural evolution of 42CrMo steel during isothermal transformation. Discover Metals, 59(1). https://doi.org/10.1007/s13404-026-00378-0

Vancouver

Liu Y, Wang C, Li J, Wu Z. Microstructural evolution of 42CrMo steel during isothermal transformation. Discover Metals. 2026;59(1). doi:10.1007/s13404-026-00378-0

BibTeX
@article{Liu2026,
  author = {Liu, Yanning and Wang, Chunfang and Li, Jikang and Wu, Zhaobo},
  title = {Microstructural evolution of 42CrMo steel during isothermal transformation},
  journal = {Discover Metals},
  year = {2026},
  volume = {59},
  number = {1},
  doi = {10.1007/s13404-026-00378-0}
}
Kostenlos starten →