EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

Evaluation of Implant Primary Stability Using a Standard Versus an Underpreparing Drilling Protocol with Different Measurement Methods: An In Vitro Study

Marco Degidi, Giuseppe Daprile

Osteology · 16.08.2026 · 6 (3) · 16

DOI: 10.3390/osteology6030016 ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Osteology, online erschienen am 16.08.2026. Verfasst von Marco Degidi und 1 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: The primary aim of this study is to evaluate the impact of two different drilling methods on the primary stability of implants inserted into polyurethane blocks simulating different bone densities. The secondary aim is to analyse the indication provided by three different methods used to assess primary stability.

Methods

The study was performed on two artificial bone blocks of solid rigid polyurethane without cortical layer and one laminated one. A total of 48 implants were placed following either a Regular Primary Stability (RPS) or an Enhanced Primary Stability (EPS) protocol based on site underpreparation. Immediately after implant placement, artificial intelligence tool (AIT) indication, peak insertion torque (pIT) and Resonance Frequency Analysis (RFA) values were recorded. The values were then categorised as suitable or not suitable for single-crown immediate loading by bone density and drilling protocol.

Results

EPS drilling protocol produced significantly higher primary stability values than those in all bone densities, regardless of the primary stability measurement method used, except for the implants placed in D4 and evaluated by AIT. The grouping of values shows that implants placed in D3 and D4 never reached the immediate loading threshold for a single crown. In D2, EPS and RPS protocols both reach the threshold for all implants when evaluated with pIT or RFA; when AIT is used, RPS protocol was not able to reach the single-crown threshold in 50% of cases.

Conclusions

Within the limitations of this in vitro study, underpreparation appears a viable technique to improve primary stability, nevertheless it might be insufficient to reach the threshold of immediate loading suitability in low density bone. All systems used are able to report the primary stability increase obtained by underpreparation, but AIT showed the potential to detect a loss of primary stability related to torque drop during insertion. These findings require further confirmation.

Zitieren

APA

Degidi, M., & Daprile, G. (2026). Evaluation of Implant Primary Stability Using a Standard Versus an Underpreparing Drilling Protocol with Different Measurement Methods: An In Vitro Study. Osteology, 6(3), 16. https://doi.org/10.3390/osteology6030016

Vancouver

Degidi M, Daprile G. Evaluation of Implant Primary Stability Using a Standard Versus an Underpreparing Drilling Protocol with Different Measurement Methods: An In Vitro Study. Osteology. 2026;6(3):16. doi:10.3390/osteology6030016

BibTeX
@article{Degidi2026,
  author = {Degidi, Marco and Daprile, Giuseppe},
  title = {Evaluation of Implant Primary Stability Using a Standard Versus an Underpreparing Drilling Protocol with Different Measurement Methods: An In Vitro Study},
  journal = {Osteology},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {16},
  doi = {10.3390/osteology6030016}
}
Kostenlos starten →