EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

Influence of Drilling Protocol on Primary Implant Stability Depending on Different Bone Qualities and Implant Macro-Designs, Lengths, and Diameters

Milan Stoilov iD, Ramin Shafaghi, Lea Stoilov, Helmut Stark, Michael Marder iD, Norbert Enkling, Dominik Kraus

Journal of Functional Biomaterials · 16.08.2025 · 16 (8) · 296

DOI: 10.3390/jfb16080296 ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 16.08.2025. Verfasst von Milan Stoilov und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Preclinical Education and Dental Materials Science, University Hospital Bonn, 53111 Bonn, Germany. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Access Publication Fund of the University of Bonn.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Primary implant stability is a critical factor for successful osseointegration and long-term implant success. This study investigates the impact of drilling protocol modifications on primary stability, considering different bone qualities and implant macro-designs, lengths, and diameters. Material and Methods: Three implant designs—two parallel-walled and one tapered—were tested with diameters ranging from 3.4 to 5.2 mm and lengths from 7.5 to 14.5 mm. Implants were placed in polyurethane foam blocks simulating different bone densities (10, 15, 25, and 35 PCF). A standard drilling protocol was used in all groups, with modifications based on bone quality: overpreparation in dense bone and underpreparation in softer bone. Primary stability was evaluated using insertion torque (IT). The optimal IT range was defined as 25–50 Ncm, based on clinical guidelines for immediate loading. The influence of drilling protocol adaptations on stability parameters was assessed.

Results

Insertion torque was primarily influenced by bone density and implant diameter, with implant length playing a minor role. In dense bone (D1, D2), underpreparation improved torque values, especially in smaller implants, while overpreparation reduced them. The highest torques occurred with 5.2 mm implants, sometimes exceeding 80 Ncm. Standard protocols did not consistently achieve optimal torque across implant types. In soft bone (D3), underpreparation—particularly with tapered implants—was modestly beneficial. In very soft bone (D4), none of the protocols reliably reached the desired torque range.

Conclusions

Adapting drilling protocols to bone density improves insertion torque, especially with wider implants and in denser bone. Underpreparation is generally more effective than overpreparation. However, in very soft bone, neither implant geometry nor drilling adaptations reliably achieve optimal primary stability, highlighting the need for additional strategies.

Schlagwörter

Stichwörter der Autor:innen

bone qualitydrilling protocolimplant geometryinsertion torqueprimary stability

Autor:innen und Institutionen

  • Department of Prosthodontics, Preclinical Education and Dental Materials Science, University Hospital Bonn, 53111 Bonn, Germany.
  • Department of Reconstructive Dentistry and Gerodontology, School of Dental Medicine, University of Bern, 3012 Bern, Switzerland.

ORCID-Profile: Milan Stoilov, Michael Marder

Förderung

  • Open Access Publication Fund of the University of Bonn

Zitieren

APA

Stoilov, M., Shafaghi, R., Stoilov, L., Stark, H., Marder, M., Enkling, N., & Kraus, D. (2025). Influence of Drilling Protocol on Primary Implant Stability Depending on Different Bone Qualities and Implant Macro-Designs, Lengths, and Diameters. Journal of Functional Biomaterials, 16(8), 296. https://doi.org/10.3390/jfb16080296

Vancouver

Stoilov M, Shafaghi R, Stoilov L, Stark H, Marder M, Enkling N, et al. Influence of Drilling Protocol on Primary Implant Stability Depending on Different Bone Qualities and Implant Macro-Designs, Lengths, and Diameters. Journal of Functional Biomaterials. 2025;16(8):296. doi:10.3390/jfb16080296

BibTeX
@article{Stoilov2025,
  author = {Stoilov, Milan and Shafaghi, Ramin and Stoilov, Lea and Stark, Helmut and Marder, Michael and Enkling, Norbert and Kraus, Dominik},
  title = {Influence of Drilling Protocol on Primary Implant Stability Depending on Different Bone Qualities and Implant Macro-Designs, Lengths, and Diameters},
  journal = {Journal of Functional Biomaterials},
  year = {2025},
  volume = {16},
  number = {8},
  pages = {296},
  doi = {10.3390/jfb16080296}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche