EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure and Mechanical–Tribological Properties of HVOF-Sprayed (WC-Co+Ni) Coatings on Ductile Cast Iron

Marzanna Ksiazek iD, Lukasz Boron iD, Adam Tchorz iD

Materials · 18.06.2026 · 19 (12) · 2640

DOI: 10.3390/ma19122640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.06.2026. Verfasst von Marzanna Ksiazek und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Non-Ferrous Metals, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow, Department of Non-Ferrous Metals of AGH University of Krakow.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Velocity Oxy-Fuel (HVOF) thermal spraying enables the deposition of dense coatings with low porosity, high hardness, and good fracture resistance. Tungsten carbide–cobalt (WC-Co) coatings are widely used in industrial and aerospace applications due to their excellent wear resistance; however, improving crack resistance and coating–substrate adhesion remains a key challenge. In this study, WC-Co+Ni composite coatings were deposited on ductile cast iron, with emphasis on the role of Ni addition in controlling microstructure development under HVOF conditions. Microstructural characterization was performed using optical, scanning, and transmission electron microscopy (OM, SEM, TEM), while phase composition and chemical analysis were determined by X-ray diffraction (XRD) and energy-dispersive spectroscopy (EDS). The coatings exhibited a dense, low-porosity microstructure composed of fine WC and W2C carbides embedded in a Co–Ni binder, with locally nanocrystalline regions. XRD analysis confirmed WC and W2C as the dominant phases, with weak reflections corresponding to the η-phase (Co6W6C), indicating local decarburization. The addition of Ni increases the fraction of the transient liquid phase during particle flight, enhancing carbide dissolution and mass transport in the binder, which accelerates decarburization kinetics and promotes η-phase formation. Simultaneously, Ni modifies the binder into a more ductile Co–Ni matrix, reducing the detrimental effect of brittle η-phase on coating integrity. Mechanical and tribological testing (instrumented indentation and scratch testing) demonstrated improved crack resistance, wear resistance, and adhesion. The results show that Ni addition enables process-driven microstructural tailoring of HVOF-sprayed WC-Co coatings, leading to enhanced performance despite the presence of η-phase.

Schlagwörter

Stichwörter der Autor:innen

HVOFNi additionWC-Co coatingsadhesionmicrostructuretribologywear resistance

Autor:innen und Institutionen

  • Department of Non-Ferrous Metals, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland.
  • Lukasiewicz Research Network-Krakow Institute of Technology, 73 Zakopianska Str., 30-418 Krakow, Poland.

ORCID-Profile: Marzanna Ksiazek, Lukasz Boron, Adam Tchorz

Förderung

  • AGH University of Krakow
  • Department of Non-Ferrous Metals of AGH University of Krakow

Zitieren

APA

Ksiazek, M., Boron, L., & Tchorz, A. (2026). Microstructure and Mechanical–Tribological Properties of HVOF-Sprayed (WC-Co+Ni) Coatings on Ductile Cast Iron. Materials, 19(12), 2640. https://doi.org/10.3390/ma19122640

Vancouver

Ksiazek M, Boron L, Tchorz A. Microstructure and Mechanical–Tribological Properties of HVOF-Sprayed (WC-Co+Ni) Coatings on Ductile Cast Iron. Materials. 2026;19(12):2640. doi:10.3390/ma19122640

BibTeX
@article{Ksiazek2026,
  author = {Ksiazek, Marzanna and Boron, Lukasz and Tchorz, Adam},
  title = {Microstructure and Mechanical–Tribological Properties of HVOF-Sprayed (WC-Co+Ni) Coatings on Ductile Cast Iron},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2640},
  doi = {10.3390/ma19122640}
}
Kostenlos starten →