EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Tribological, and Corrosion Behavior of HVOF-Sprayed (Cr3C2-NiCr+Ni) Coatings on Ductile Cast Iron

Marzanna Ksiazek iD, Lukasz Boron iD

Materials · 18.04.2025 · 18 (8) · 1856

DOI: 10.3390/ma18081856 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.04.2025. Verfasst von Marzanna Ksiazek und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Non-Ferrous Metals, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow, a subsidy of the Department of Non-Ferrous Metals of AGH University of Krakow.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The HVOF (High Velocity Oxy-Fuel) thermal spraying method is widely used in surface engineering to produce coatings with high hardness, low porosity, and excellent crack resistance. Composite coatings with chromium carbide (Cr3C2) in a nickel–chromium (NiCr) matrix are commonly applied in demanding environments, such as the energy and transport sectors. This study compares the microstructure, mechanical, tribological, and corrosion properties of two coatings—Cr3C2-25(Ni20Cr)-10(Ni) and Cr3C2-25(Ni20Cr)—deposited on ductile cast iron using HVOF. The addition of 10 wt.% Ni enhances coating integrity, mechanical performance, and environmental resistance by improving ductility, reducing residual stress, enhancing wettability, and balancing hardness with improved crack, wear, and corrosion resistance. Microstructure analysis via LM (Light Microscopy) and SEM (Scanning Electron Microscopy), along with chemical and phase characterization using EDS (Energy Dispersive X-ray Spectroscopy) and XRD (X-ray Diffraction), revealed that the Ni-enriched Cr3C2-25(Ni20Cr)-10(Ni) coating exhibited a denser structure, lower porosity, and high hardness. Its microstructure consists of large, partially melted Ni particles and fine Cr3C2 and Cr7C3 carbides embedded in the NiCr matrix, some at submicron scales. Performance tests, including indentation (HIT, EIT, KIC), scratch, and corrosion resistance assessments, confirmed that Ni addition improves crack resistance, wear durability, and corrosion protection. Consequently, these coatings demonstrate superior operational durability, making them more effective in challenging environments.

Schlagwörter

Stichwörter der Autor:innen

Cr3C2-NiCr coatingHVOF sprayingcorrosion testinstrumented indentationmicrostructure

Autor:innen und Institutionen

  • Department of Non-Ferrous Metals, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland.
  • Lukasiewicz Research Network-Krakow Institute of Technology, 73 Zakopianska Str., 30-418 Krakow, Poland.

ORCID-Profile: Marzanna Ksiazek, Lukasz Boron

Förderung

  • AGH University of Krakow
  • a subsidy of the Department of Non-Ferrous Metals of AGH University of Krakow

Zitieren

APA

Ksiazek, M., & Boron, L. (2025). Microstructure, Tribological, and Corrosion Behavior of HVOF-Sprayed (Cr3C2-NiCr+Ni) Coatings on Ductile Cast Iron. Materials, 18(8), 1856. https://doi.org/10.3390/ma18081856

Vancouver

Ksiazek M, Boron L. Microstructure, Tribological, and Corrosion Behavior of HVOF-Sprayed (Cr3C2-NiCr+Ni) Coatings on Ductile Cast Iron. Materials. 2025;18(8):1856. doi:10.3390/ma18081856

BibTeX
@article{Ksiazek2025,
  author = {Ksiazek, Marzanna and Boron, Lukasz},
  title = {Microstructure, Tribological, and Corrosion Behavior of HVOF-Sprayed (Cr3C2-NiCr+Ni) Coatings on Ductile Cast Iron},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {8},
  pages = {1856},
  doi = {10.3390/ma18081856}
}
Kostenlos starten →