EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An HVOF-Sprayed (Cr3C2-NiCr+Co) Composite Coating on Ductile Cast Iron: Microstructure, Mechanical Properties, and Scratch Resistance

Marzanna Ksiazek iD, Katarzyna Łyp-Wrońska iD

Materials · 25.03.2024 · 17 (7) · 1484

DOI: 10.3390/ma17071484 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.03.2024. Verfasst von Marzanna Ksiazek und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Non-Ferrous Metals, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow, Department of Non-Ferrous Metals of AGH University of Krakow.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-velocity oxy-fuel (HVOF) thermally sprayed Cr3C2-NiCr coatings have been shown to be effective in shielding important machinery and equipment components from wear in harsh, high-temperature conditions. In this investigation, the HVOF thermal spray coating technique was used to deposit Cr3C2-NiCr powder with 10% Co particles onto ductile cast iron. The effect of the Co particles on the mechanical, tribological, and microstructure characteristics of a Cr3C2-NiCr/ductile cast iron system was investigated. The microstructure analysis employed various techniques, including light microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). Scratch tests were applied to analyze the coating quality and adhesion. The coatings created using the HVOF spray method with Cr3C2-NiCr powders mixed with Co particles exhibited a dense structure containing large Co particles, partially melted, and very fine Cr3C2 particles embedded into the NiCr alloy matrix. Additionally, they possessed high hardness and excellent adhesion to the substrate. The results of bending strength tests were also presented, together with information on the coating’s microhardness and fracture toughness. These included an analysis of the cracks and delamination in the Cr3C2-NiCr/ductile cast iron system. It was observed that the addition of Co particles significantly increased the resistance to cracking and wear behavior in the studied system.

Schlagwörter

Stichwörter der Autor:innen

(Cr3C2-NiCr+Co) composite coatingHVOFcoating qualitymechanical propertiesscratch bond strength

Autor:innen und Institutionen

  • Department of Non-Ferrous Metals, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland.

ORCID-Profile: Marzanna Ksiazek, Katarzyna Łyp-Wrońska

Förderung

  • AGH University of Krakow
  • Department of Non-Ferrous Metals of AGH University of Krakow

Zitieren

APA

Ksiazek, M., & Łyp-Wrońska, K. (2024). An HVOF-Sprayed (Cr3C2-NiCr+Co) Composite Coating on Ductile Cast Iron: Microstructure, Mechanical Properties, and Scratch Resistance. Materials, 17(7), 1484. https://doi.org/10.3390/ma17071484

Vancouver

Ksiazek M, Łyp-Wrońska K. An HVOF-Sprayed (Cr3C2-NiCr+Co) Composite Coating on Ductile Cast Iron: Microstructure, Mechanical Properties, and Scratch Resistance. Materials. 2024;17(7):1484. doi:10.3390/ma17071484

BibTeX
@article{Ksiazek2024,
  author = {Ksiazek, Marzanna and Łyp-Wrońska, Katarzyna},
  title = {An HVOF-Sprayed (Cr3C2-NiCr+Co) Composite Coating on Ductile Cast Iron: Microstructure, Mechanical Properties, and Scratch Resistance},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1484},
  doi = {10.3390/ma17071484}
}
Kostenlos starten →