EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thickness- and Binder-Chemistry-Dependent Structural, Mechanical, and Tribological Performance of HVOF-Sprayed WC-Co and WC-Co-Cr Coatings on High-Speed Steel

Cevher Kursat Macit, Bünyamin Aksakal, Merve Ayık, Turan Gürgenç, Naim Aslan

Crystals · 30.06.2026 · 16 (7) · 427

DOI: 10.3390/cryst16070427 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Crystals, online erschienen am 30.06.2026. Verfasst von Cevher Kursat Macit und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Firat University Research Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-velocity oxy-fuel (HVOF) spraying was used to deposit WC-Co and WC-Co-Cr coatings on high-speed steel in order to determine how binder chemistry and coating thickness jointly control load support, friction, and dry sliding wear resistance. Nominal 50 and 100 µm coatings were compared within the same substrate framework by XRD, FT-IR, SEM/EDX, cross-sectional image analysis, Vickers hardness testing, dry sliding wear testing, and post-wear SEM/EDX. The coatings retained WC as the dominant crystalline phase, while weak overlapping features were associated with binder-rich regions and limited decarburization products. Cross-sectional observations confirmed continuous coating build-up close to the nominal thicknesses and low apparent dark-feature/porosity fractions. All WC-based coatings increased the effective hardness and reduced mass loss relative to uncoated HSS. Among the tested conditions, WC-Co-Cr-100 provided the highest effective hardness and the lowest mass loss after 1000 m sliding, whereas WC-Co-100 produced the lowest mean coefficient of friction. The results show that low friction and high wear resistance are not governed by identical mechanisms: WC-Co favours interfacial shear reduction, while the thicker Cr-containing coating provides superior resistance to material removal through improved carbide retention, binder stability, and coating-scale load support.

Förderung

  • Firat University Research Fund

Zitieren

APA

Macit, C. K., Aksakal, B., Ayık, M., Gürgenç, T., & Aslan, N. (2026). Thickness- and Binder-Chemistry-Dependent Structural, Mechanical, and Tribological Performance of HVOF-Sprayed WC-Co and WC-Co-Cr Coatings on High-Speed Steel. Crystals, 16(7), 427. https://doi.org/10.3390/cryst16070427

Vancouver

Macit CK, Aksakal B, Ayık M, Gürgenç T, Aslan N. Thickness- and Binder-Chemistry-Dependent Structural, Mechanical, and Tribological Performance of HVOF-Sprayed WC-Co and WC-Co-Cr Coatings on High-Speed Steel. Crystals. 2026;16(7):427. doi:10.3390/cryst16070427

BibTeX
@article{Macit2026,
  author = {Macit, Cevher Kursat and Aksakal, Bünyamin and Ayık, Merve and Gürgenç, Turan and Aslan, Naim},
  title = {Thickness- and Binder-Chemistry-Dependent Structural, Mechanical, and Tribological Performance of HVOF-Sprayed WC-Co and WC-Co-Cr Coatings on High-Speed Steel},
  journal = {Crystals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {427},
  doi = {10.3390/cryst16070427}
}
Kostenlos starten →