EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Analysis of a 3D-Printed Acetabular Prosthesis for an Acetabular Defect According to the Paprosky Classification

Mario Ceddia iD, Giuseppe Solarino, Alessandro Pulcrano iD, Antonella Benedetto, Bartolomeo Trentadue iD

Materials · 15.03.2025 · 18 (6) · 1295

DOI: 10.3390/ma18061295 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.03.2025. Verfasst von Mario Ceddia und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics, Mathematics and Management, Politecnico di Bari University, 70125 Bari, Italy. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The treatment of Paprosky Type III acetabular defects is a significant challenge in orthopedic surgery, as standard components often do not fit properly. This study aims to evaluate the biomechanical efficacy of a custom 3D-printed PEEK acetabular prosthesis compared to a conventional titanium implant. A 3D model of the pelvis was created using a computed tomography scanner and a custom-made acetabular implant was designed. Finite element analysis (FEA) was performed using Ansys Workbench to evaluate the stress and strain distribution of two materials on the pelvic bone. The results showed that the titanium prosthesis model had less strain transmitted to the bone, while the PEEK model had better stress transmission and bone stimulation. The use of custom implants reduced the risk of stress shielding, potentially improving long-term bone health. Three-dimensional-printed acetabular prostheses therefore offer significant advantages over traditional implants, suggesting improved implant stability and reduced failure rates.

Schlagwörter

Stichwörter der Autor:innen

3D printingFEAcustomized acetabular prosthesistype III acetabular defects

Autor:innen und Institutionen

  • Department of Mechanics, Mathematics and Management, Politecnico di Bari University, 70125 Bari, Italy.
  • Department of Translational Biomedicine and Neuroscience, University of Bari, 70125 Bari, Italy.

ORCID-Profile: Mario Ceddia, Alessandro Pulcrano, Bartolomeo Trentadue

Zitieren

APA

Ceddia, M., Solarino, G., Pulcrano, A., Benedetto, A., & Trentadue, B. (2025). Finite Element Analysis of a 3D-Printed Acetabular Prosthesis for an Acetabular Defect According to the Paprosky Classification. Materials, 18(6), 1295. https://doi.org/10.3390/ma18061295

Vancouver

Ceddia M, Solarino G, Pulcrano A, Benedetto A, Trentadue B. Finite Element Analysis of a 3D-Printed Acetabular Prosthesis for an Acetabular Defect According to the Paprosky Classification. Materials. 2025;18(6):1295. doi:10.3390/ma18061295

BibTeX
@article{Ceddia2025,
  author = {Ceddia, Mario and Solarino, Giuseppe and Pulcrano, Alessandro and Benedetto, Antonella and Trentadue, Bartolomeo},
  title = {Finite Element Analysis of a 3D-Printed Acetabular Prosthesis for an Acetabular Defect According to the Paprosky Classification},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {6},
  pages = {1295},
  doi = {10.3390/ma18061295}
}
Kostenlos starten →