EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design, Stereolithographic 3D Printing, and Characterization of TPMS Scaffolds

Roberta Gabrieli, Raphael Wenger, Marco Mazza, Enrica Verné iD, Francesco Baino iD

Materials · 29.01.2024 · 17 (3) · 654

DOI: 10.3390/ma17030654 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.01.2024. Verfasst von Roberta Gabrieli und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Physics and Engineering, Department of Applied Science and Technology, Politecnico di Torino, 10129 Torino, Italy. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anatomical and functional tissue loss is one of the most debilitating problems and involves a great cost to the international health-care sector. In the field of bone tissue, the use of scaffolds to promote tissue regeneration is a topic of great interest. In this study, a combination of additive manufacturing and computational methods led to creating porous scaffolds with complex microstructure and mechanical behavior comparable to those of cancellous bone. Specifically, some representative models of triply periodic minimal surfaces (TPMSs) were 3D-printed through a stereolithographic technique using a dental resin. Schwarz primitive and gyroid surfaces were created computationally: they are characterized by a complex geometry and a high pore interconnectivity, which play a key role in the mechanism of cell proliferation. Several design parameters can be varied in these structures that can affect the performance of the scaffold: for example, the larger the wall thickness, the lower the elastic modulus and compressive strength. Morphological and mechanical analyses were performed to experimentally assess the properties of the scaffolds. The relationship between relative density and elastic modulus has been analyzed by applying different models, and a power-law equation was found suitable to describe the trend in both structures.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbiomaterialsscaffoldtissue engineeringtriply periodic minimal surface

Autor:innen und Institutionen

  • Institute of Materials Physics and Engineering, Department of Applied Science and Technology, Politecnico di Torino, 10129 Torino, Italy.
  • School of Engineering and Architecture Fribourg, University of Applied Sciences and Arts Western Switzerland, 1700 Fribourg, Switzerland.

ORCID-Profile: Enrica Verné, Francesco Baino

Zitieren

APA

Gabrieli, R., Wenger, R., Mazza, M., Verné, E., & Baino, F. (2024). Design, Stereolithographic 3D Printing, and Characterization of TPMS Scaffolds. Materials, 17(3), 654. https://doi.org/10.3390/ma17030654

Vancouver

Gabrieli R, Wenger R, Mazza M, Verné E, Baino F. Design, Stereolithographic 3D Printing, and Characterization of TPMS Scaffolds. Materials. 2024;17(3):654. doi:10.3390/ma17030654

BibTeX
@article{Gabrieli2024,
  author = {Gabrieli, Roberta and Wenger, Raphael and Mazza, Marco and Verné, Enrica and Baino, Francesco},
  title = {Design, Stereolithographic 3D Printing, and Characterization of TPMS Scaffolds},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {3},
  pages = {654},
  doi = {10.3390/ma17030654}
}
Kostenlos starten →