EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Physicochemical Characterization and Hydrolytic Stability of TPMS‐Architected Nerve Guide Conduits Fabricated by DLP 3D Printing

Aybegüm Numanoğlu, İsmail Şahin, Neslihan Top

Macromolecular Materials and Engineering · 2026-07 · 311 (7)

DOI: 10.1002/mame.70281 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 18.07.2026. Verfasst von Aybegüm Numanoğlu und 2 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the literature, a limited number of studies have investigated the combined effects of electrical conductivity, swelling behavior, and degradation properties in Triple Periodic Minimal Surface (TPMS)‐based nerve guidance conduits (NGCs). In this study, four TPMS geometries (Schwarz, Gyroid, Diamond, and Split‐P) and one solid cylindrical geometry were produced via Digital Light Processing (DLP) and evaluated comparatively. Electrical measurements revealed that conductivity is largely dependent on the internal architecture. The solid cylinder exhibited the highest value (2.85 × 10 − 4 S/cm), followed by Gyroid (2.80 × 10 − 4 S/cm). The Diamond structure showed the lowest conductivity (1.53 × 10 − 4 S/cm). Eight‐week in vitro degradation tests revealed accelerated mass loss in porous TPMS structures; the Gyroid exhibited the highest degradation rate (96.16% remaining mass), while the Schwarz structure showed the highest mass retention rate (98.62%) among the TPMS designs. Compression tests confirmed that all TPMS‐based channels maintained sufficient mechanical integrity under physiologically relevant loads. The findings demonstrate that the TPMS architecture provides an effective design parameter for customizing the electrical, mechanical, and degradation behavior of NGCs without altering the base material, suggesting potential for nerve regeneration applications.

Zitieren

APA

Numanoğlu, A., Şahin, İ., & Top, N. (2026). Physicochemical Characterization and Hydrolytic Stability of TPMS‐Architected Nerve Guide Conduits Fabricated by DLP 3D Printing. Macromolecular Materials and Engineering, 311(7). https://doi.org/10.1002/mame.70281

Vancouver

Numanoğlu A, Şahin İ, Top N. Physicochemical Characterization and Hydrolytic Stability of TPMS‐Architected Nerve Guide Conduits Fabricated by DLP 3D Printing. Macromolecular Materials and Engineering. 2026;311(7). doi:10.1002/mame.70281

BibTeX
@article{Numanolu2026,
  author = {Numanoğlu, Aybegüm and Şahin, İsmail and Top, Neslihan},
  title = {Physicochemical Characterization and Hydrolytic Stability of TPMS‐Architected Nerve Guide Conduits Fabricated by DLP 3D Printing},
  journal = {Macromolecular Materials and Engineering},
  year = {2026},
  volume = {311},
  number = {7},
  doi = {10.1002/mame.70281}
}
Kostenlos starten →