EUVIMEDEUVIMED entdecken
Crossref

Personalized TPMS scaffolds for maxillary bone regeneration: Inverse design, simulation, and stereolithographic fabrication

Christian Cobos Maldonado, Santiago Ferrandiz Bou, Pedro Abril, Diego Cárdenas, Luis Garzon

International Journal of Bioprinting · 03.08.2026 · 026280294

DOI: 10.36922/ijb026280294 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 03.08.2026. Verfasst von Christian Cobos Maldonado und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper describes a method of designing and producing patient-specific scaffold prototypes for bone tissue regeneration by means of reverse engineering techniques and triply periodic minimum surface (TPMS) structures to create a tissue scaffold-type implant. A 3-D bone defect model was reconstructed from DICOM tomographic images of an actual clinical case. Five scaffold variants were designed on Meshmixer and nTop™ computer-aided design (CAD) software, each variant with a different TPMS topology (Gyroid, Schwarz P, Diamond, Lidinoid, and Split P), while maintaining a constant cell size of 1 mm and a wall thickness of 0.16 mm. The scaffolds’ behaviour under a compressive load of 698 N was computationally evaluated using finite element analysis (FEA) in which the Lidinoid and Schwarz P structures were found to exhibit the least deformation. The scaffolds were fabricated by stereolithography (SLA) and a morphological analysis was performed in which interconnected porosity and pore dimensions of between 100 µm and 500 µm were identified, conditions considered optimal for cell infiltration and vascularization.These findings demonstrate the feasibility of a proof-of-concept workflow for designing and fabricating patient-specific TPMS scaffold prototypes and identify topology-dependent differences in their predicted mechanical response and visible pore morphology. Further studies using clinically suitable osteoconductive and bioresorbable materials are required before considering implantation.

Zitieren

APA

Maldonado, C. C., Bou, S. F., Abril, P., Cárdenas, D., & Garzon, L. (2026). Personalized TPMS scaffolds for maxillary bone regeneration: Inverse design, simulation, and stereolithographic fabrication. International Journal of Bioprinting, 0(0), 026280294. https://doi.org/10.36922/ijb026280294

Vancouver

Maldonado CC, Bou SF, Abril P, Cárdenas D, Garzon L. Personalized TPMS scaffolds for maxillary bone regeneration: Inverse design, simulation, and stereolithographic fabrication. International Journal of Bioprinting. 2026;0(0):026280294. doi:10.36922/ijb026280294

BibTeX
@article{Maldonado2026,
  author = {Maldonado, Christian Cobos and Bou, Santiago Ferrandiz and Abril, Pedro and Cárdenas, Diego and Garzon, Luis},
  title = {Personalized TPMS scaffolds for maxillary bone regeneration: Inverse design, simulation, and stereolithographic fabrication},
  journal = {International Journal of Bioprinting},
  year = {2026},
  volume = {0},
  number = {0},
  pages = {026280294},
  doi = {10.36922/ijb026280294}
}
Kostenlos starten →