EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of the ITO Layers’ Thicknesses on Their Chosen Physical Surface Parameters

Małgorzata Musztyfaga-Staszuk iD, Katarzyna Gawlińska-Nęcek iD, Robert Socha iD, Piotr Panek

Materials · 06.02.2023 · 16 (4) · 1363

DOI: 10.3390/ma16041363 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.02.2023. Verfasst von Małgorzata Musztyfaga-Staszuk und 3 weiteren Autor:innen. Beteiligte Einrichtung: Welding Department, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents the results concerning the influence of the thickness of the ITO and In2O3 layers deposited by the magnetron sputtering method on the physical parameters characterising their surface properties. The characterisation parameters were obtained by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and Kelvin probe. The increase in the layers’ thickness related to the time of their fabrication causes an increase in the surface roughness and the value of the work function, followed by a decrease in the concentration of elements and compounds in the near-surface area.

Schlagwörter

Stichwörter der Autor:innen

indium tin oxide (ITO)transparent conductive oxideswork function

Autor:innen und Institutionen

  • Welding Department, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland.
  • Institute of Metallurgy and Materials Science PAS, Reymonta 25, 30-059 Krakow, Poland.
  • Centrum Badań i Rozwoju Technologii dla Przemysłu S.A., Waryńskiego 3A, 00-645 Warszawa, Poland.

ORCID-Profile: Małgorzata Musztyfaga-Staszuk, Katarzyna Gawlińska-Nęcek, Robert Socha

Förderung

  • Silesian University of Technology

Zitieren

APA

Musztyfaga-Staszuk, M., Gawlińska-Nęcek, K., Socha, R., & Panek, P. (2023). The Influence of the ITO Layers’ Thicknesses on Their Chosen Physical Surface Parameters. Materials, 16(4), 1363. https://doi.org/10.3390/ma16041363

Vancouver

Musztyfaga-Staszuk M, Gawlińska-Nęcek K, Socha R, Panek P. The Influence of the ITO Layers’ Thicknesses on Their Chosen Physical Surface Parameters. Materials. 2023;16(4):1363. doi:10.3390/ma16041363

BibTeX
@article{MusztyfagaStaszuk2023,
  author = {Musztyfaga-Staszuk, Małgorzata and Gawlińska-Nęcek, Katarzyna and Socha, Robert and Panek, Piotr},
  title = {The Influence of the ITO Layers’ Thicknesses on Their Chosen Physical Surface Parameters},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {4},
  pages = {1363},
  doi = {10.3390/ma16041363}
}
Kostenlos starten →