EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Laser Remelting Parameters on the Surface Quality of Copper

Hengzheng Li, Yang Chen, Shuai Chen, Yan Liu, Conghu Liu iD

Micromachines · 20.07.2024 · 15 (7) · 927

DOI: 10.3390/mi15070927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.07.2024. Verfasst von Hengzheng Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Research Project in Universities of Anhui Province in China, the Scientific Research Foundation for Doctoral of Suzhou University, the Open Project of Suzhou University Research Platform.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to improve the surface quality of copper after laser remelting, this article took laser frequency, pulse width, and energy density as the research objects and used scanning electron microscopy (SEM), a laser confocal three-dimensional measurement instrument, hardness tester, and friction and wear measurement instrument to study the surface morphology, surface roughness, microhardness, and wear resistance of copper, respectively. The results indicate that the frequency, pulse width, and energy density of laser remelting could directly affect the surface quality of the sample, but the influence of frequency and pulse width was more significant. When the laser remelting frequency was 10 Hz, the pulse width was 10 ms, and the energy density was 132.69 J/mm2, the sample exhibited good surface morphology, roughness, and wear resistance. The relevant research in this article can provide a good reference for the laser surface treatment of copper-based materials.

Schlagwörter

Stichwörter der Autor:innen

laser surface remeltingprocess parameterssurface morphologysurface roughnesswear resistance

Autor:innen und Institutionen

  • School of Mechanical and Electronic Engineering, Suzhou University, Suzhou 234000, China.
  • School of Chemistry and Materials Science, University of Science and Technology of China, Hefei 230026, China.

ORCID-Profile: Conghu Liu

Förderung

  • the Natural Science Research Project in Universities of Anhui Province in China
  • the Scientific Research Foundation for Doctoral of Suzhou University
  • the Open Project of Suzhou University Research Platform
  • the Teaching and Research Project of Suzhou University
  • the Anhui Higher Education Quality Engineering Project

Zitieren

APA

Li, H., Chen, Y., Chen, S., Liu, Y., & Liu, C. (2024). The Influence of Laser Remelting Parameters on the Surface Quality of Copper. Micromachines, 15(7), 927. https://doi.org/10.3390/mi15070927

Vancouver

Li H, Chen Y, Chen S, Liu Y, Liu C. The Influence of Laser Remelting Parameters on the Surface Quality of Copper. Micromachines. 2024;15(7):927. doi:10.3390/mi15070927

BibTeX
@article{Li2024,
  author = {Li, Hengzheng and Chen, Yang and Chen, Shuai and Liu, Yan and Liu, Conghu},
  title = {The Influence of Laser Remelting Parameters on the Surface Quality of Copper},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {7},
  pages = {927},
  doi = {10.3390/mi15070927}
}
Kostenlos starten →