EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biomimetic laser surface texturing of AISI 316LVM: influence of process parameters on surface topography

Şefika Kasman, Sertan Ozan

Materials Testing · 25.11.2026 · 68 (11) · 2264-2276

DOI: 10.1515/mt-2026-0248 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 17.09.2026. Verfasst von Şefika Kasman und 1 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, biomimetic spiral surface structures inspired by seashells were fabricated on AISI 316LVM stainless steel using a laser surface texturing process. The effects of process parameters on surface topography were investigated. A 50 W fiber laser system was used in the texturing process of AISI 316LVM stainless steel with scanning speeds of 400–1,200 mm s −1 , laser frequencies of 50–100 kHz, and spiral pitches of 0.4–0.6 mm. The arithmetic mean height Sa, developed interfacial area ratio Sdr, and kurtosis of the surface height distribution Sku were evaluated. Scanning speed was revealed to be the dominant factor affecting Sa. Sa decreased as scanning speed increased. Increasing the laser frequency led to greater pulse overlap, resulting in more homogeneous surfaces. However, increasing the spiral pitch resulted in more distinct topographies and a higher Sdr. The developed regression models for Sa and Sdr showed strong agreement with the experimental data, although the predictive capability for Sku was comparatively limited. This study exhibits the applicability of laser-based biomimetic surface texturing on AISI 316LVM, providing important findings regarding parameter-surface relationships.

Zitieren

APA

Kasman, Ş., & Ozan, S. (2026). Biomimetic laser surface texturing of AISI 316LVM: influence of process parameters on surface topography. Materials Testing, 68(11), 2264-2276. https://doi.org/10.1515/mt-2026-0248

Vancouver

Kasman Ş, Ozan S. Biomimetic laser surface texturing of AISI 316LVM: influence of process parameters on surface topography. Materials Testing. 2026;68(11):2264-2276. doi:10.1515/mt-2026-0248

BibTeX
@article{Kasman2026,
  author = {Kasman, Şefika and Ozan, Sertan},
  title = {Biomimetic laser surface texturing of AISI 316LVM: influence of process parameters on surface topography},
  journal = {Materials Testing},
  year = {2026},
  volume = {68},
  number = {11},
  pages = {2264--2276},
  doi = {10.1515/mt-2026-0248}
}
Kostenlos starten →