EUVIMEDEUVIMED entdecken
Crossref

Influence of process parameters on the sheet resistance and transmittance of ultrathin indium tin oxide (ITO) films

Razia Khan Sharme, Jessica Patel, Mahin Muntasir, Luis Rodriguez de Marcos, Javier G. Del Hoyo, Manuel A. Quijada, Mukti M. Rana

Optical Materials Express · 01.05.2026 · 16 (5) · 1401

DOI: 10.1364/ome.586992 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Optical Materials Express, online erschienen am 22.04.2026. Verfasst von Razia Khan Sharme und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 84 Literaturangaben. Gefördert von: National Aeronautics and Space Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Indium tin oxide (ITO) thin films are widely used in solar cells, energy-efficient windows, and optoelectronic devices due to their high optical transmittance and low sheet resistance. This study examines how fine-tuning of various deposition parameters, including Ar gas flow, temperature, deposition time, and sputtering RF power, impacts the sheet resistance and transmittance of ultrathin ITO films. The sheet resistance and transmittance were measured using a four-point probe and a UV-Vis spectrophotometer. We employed X-ray diffraction (XRD) to analyze the crystallinity of the films and X-ray photoelectron spectroscopy (XPS) to assess their chemical composition and defect states. To compare the performance of transparent conductors, we used Haacke's figure of merit (FOM), which emphasizes high optical transmittance while accounting for sheet resistance. The optimal gas flow rate for producing ITO films was 50 sccm of argon. This setting minimized defects and achieved a 97% normalized transmittance, resulting in the highest FOM value of 4.86 × 10 −3 Ω −1 . At temperatures above 250 °C, the sheet resistance decreased, which may be attributed to improved crystallinity and enhanced dopant activation. Such effects are widely reported to influence the electrical properties of ITO through defect chemistry and substitutional Sn donor behavior. Additionally, as the deposition time increased, the films became thicker, reducing sheet resistance. Atomic force microscopy (AFM) analysis confirms continuous film coverage even at thicknesses near 3 nm, indicating that the deposited ITO layers are above the percolation threshold despite their ultrathin nature. Moreover, optimized sputtering power allowed for the fabrication of low-resistance films suitable for low-emissivity (Low-E) coatings in smart windows.

Förderung

  • National Aeronautics and Space Administration

Zitieren

APA

Sharme, R. K., Patel, J., Muntasir, M., Marcos, L. R. D., Hoyo, J. G. D., Quijada, M. A., & Rana, M. M. (2026). Influence of process parameters on the sheet resistance and transmittance of ultrathin indium tin oxide (ITO) films. Optical Materials Express, 16(5), 1401. https://doi.org/10.1364/ome.586992

Vancouver

Sharme RK, Patel J, Muntasir M, Marcos LRD, Hoyo JGD, Quijada MA, et al. Influence of process parameters on the sheet resistance and transmittance of ultrathin indium tin oxide (ITO) films. Optical Materials Express. 2026;16(5):1401. doi:10.1364/ome.586992

BibTeX
@article{Sharme2026,
  author = {Sharme, Razia Khan and Patel, Jessica and Muntasir, Mahin and Marcos, Luis Rodriguez de and Hoyo, Javier G. Del and Quijada, Manuel A. and Rana, Mukti M.},
  title = {Influence of process parameters on the sheet resistance and transmittance of ultrathin indium tin oxide (ITO) films},
  journal = {Optical Materials Express},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {1401},
  doi = {10.1364/ome.586992}
}
Kostenlos starten →