EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biomechanical Behaviors of Molars Restored with Endocrowns Composed of Different Materials

Zhi Li, Junxin Zhu iD, Yongxiang Xu, Xudong Bao, Xiaoyan Wang iD

Materials · 08.01.2025 · 18 (2) · 250

DOI: 10.3390/ma18020250 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.01.2025. Verfasst von Zhi Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Cariology and Endodontology, Peking University School and Hospital of Stomatology, Beijing 100101, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To assess the biomechanical behaviors of endodontically treated molars (ETMs) restored with endocrowns composed of different materials, forty mandibular molars were assigned to five groups (n = 8 each). Untreated molars constituted the control group (group C); the rest of the teeth that underwent root canal therapy were restored with endocrowns composed of polycrystalline ceramics (ST zirconia®, UPCERA) in group ZR, lithium disilicate glass ceramics (UP.CAD®, UPCERA) in group LD, resin-based nanoceramics (Hyramic®, UPCERA) in group NC, and feldspathic ceramics (CEREC Blocs®, Sirona) in group FC. All teeth were axially loaded until fracture. The process was recorded using a high-speed camera system, and fractographic analysis was conducted. The results showed that fracture loads did not significantly differ among groups C, LD, and NC; the loads were significantly lower than the load in group ZR but higher than the load in group FC. The mean time from the initial crack to complete tooth fracture varied. Group C had the longest time, followed by group NC; groups ZR, LD, and FC had the shortest time. Similar failure patterns were observed in groups ZR and LD, which were more regular than the pattern in group NC; group FC exhibited the roughest fracture surfaces. Fracture resistance testing combined with a high-speed camera system and fractographic analysis provides a promising modality for studying the biomechanical behaviors of restored teeth. Endocrowns composed of lithium disilicate glass ceramics or resin-based nanoceramics offer alternative restorations for ETMs with extensive coronal loss.

Schlagwörter

Stichwörter der Autor:innen

biomechanical behaviorceramicsendocrownfractographic analysishigh-speed camera system

Autor:innen und Institutionen

  • Department of Cariology and Endodontology, Peking University School and Hospital of Stomatology, Beijing 100101, China.
  • Second Dental Center, Peking University School and Hospital of Stomatology, Beijing 100101, China.
  • Department of Dental Materials, Peking University School and Hospital of Stomatology & National Center for Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Research Center of Oral…

ORCID-Profile: Junxin Zhu, Xiaoyan Wang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, Z., Zhu, J., Xu, Y., Bao, X., & Wang, X. (2025). Biomechanical Behaviors of Molars Restored with Endocrowns Composed of Different Materials. Materials, 18(2), 250. https://doi.org/10.3390/ma18020250

Vancouver

Li Z, Zhu J, Xu Y, Bao X, Wang X. Biomechanical Behaviors of Molars Restored with Endocrowns Composed of Different Materials. Materials. 2025;18(2):250. doi:10.3390/ma18020250

BibTeX
@article{Li2025,
  author = {Li, Zhi and Zhu, Junxin and Xu, Yongxiang and Bao, Xudong and Wang, Xiaoyan},
  title = {Biomechanical Behaviors of Molars Restored with Endocrowns Composed of Different Materials},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {2},
  pages = {250},
  doi = {10.3390/ma18020250}
}
Kostenlos starten →