Developing Bioengineered 3D-Printed Composite Scaffolds with Antimicrobial Potential for Bone Tissue Regeneration
Journal of Functional Biomaterials · 19.06.2025 · 16 (6) · 227
DOI: 10.3390/jfb16060227 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 19.06.2025. Verfasst von Andreea Trifan und 10 weiteren Autor:innen. Beteiligte Einrichtung: 3D Printing Laboratory, Center of Innovation and e-Health, "Carol Davila" University of Medicine and Pharmacy, 020021 Bucharest, Romania. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research activity proposes to produce composite hydrogel–bioactive glass. The primary purpose of this research is to develop and optimize 3D-printed scaffolds using doped bioglass, aimed at enhancing bone regeneration in bone defects. The bioglass, a bioactive material known for its bone-bonding ability (SiO2–P2O5–CaO–Na2O), co-doped with europium and silver was synthesized and doped to improve its biological properties. This doped bioglass was then combined with a biocompatible hydrogel, chosen for its adequate cellular response and printability. The composite material was printed to form a scaffold, providing a structure that not only supports the damaged bone but also encourages osteogenesis. A variety of methods were employed to assess the rheological, compositional, and morphological characteristics of the samples: Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS). Additionally, simulated body fluid (SBF) immersion for bioactivity monitoring and immunocytochemistry for cell viability were used to evaluate the biological response of the scaffolds.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- 3D Printing Laboratory, Center of Innovation and e-Health, "Carol Davila" University of Medicine and Pharmacy, 020021 Bucharest, Romania.
- Faculty of Chemical Engineering and Biotechnologies, University Politehnica of Bucharest, 1-7 Gh. Polizu Street, 011061 Bucharest, Romania.
- Faculty of Medical Engineering, University Politehnica of Bucharest, 1-7 Gh. Polizu Street, 011061 Bucharest, Romania.
- REOROM Laboratory, Hydraulics Department, Politehnica University of Bucharest, 313 Splaiul Independenţei, 060042 Bucharest, Romania.
- Special Components for Gas Turbines Department, Romanian Research and Development Institute for Gas Turbine COMOTI, 220D Iuliu Maniu, 061126 Bucharest, Romania.
ORCID-Profile: Cristina Busuioc, Izabela-Cristina Stancu
Zitieren
APA
Trifan, A., Liciu, E., Busuioc, C., Stancu, I. C., Banciu, A., Nicolae, C., Dragomir, M., Cristea, D. D., Sabău, R. E., Nițulescu, D. A., & Paraschiv, A. (2025). Developing Bioengineered 3D-Printed Composite Scaffolds with Antimicrobial Potential for Bone Tissue Regeneration. Journal of Functional Biomaterials, 16(6), 227. https://doi.org/10.3390/jfb16060227
Vancouver
Trifan A, Liciu E, Busuioc C, Stancu IC, Banciu A, Nicolae C, et al. Developing Bioengineered 3D-Printed Composite Scaffolds with Antimicrobial Potential for Bone Tissue Regeneration. Journal of Functional Biomaterials. 2025;16(6):227. doi:10.3390/jfb16060227
BibTeX
@article{Trifan2025,
author = {Trifan, Andreea and Liciu, Eduard and Busuioc, Cristina and Stancu, Izabela-Cristina and Banciu, Adela and Nicolae, Carmen and Dragomir, Mihai and Cristea, Doru-Daniel and Sabău, Rosina-Elena and Nițulescu, David-Andrei and Paraschiv, Alexandru},
title = {Developing Bioengineered 3D-Printed Composite Scaffolds with Antimicrobial Potential for Bone Tissue Regeneration},
journal = {Journal of Functional Biomaterials},
year = {2025},
volume = {16},
number = {6},
pages = {227},
doi = {10.3390/jfb16060227}
}
EUVIMED