EUVIMEDEUVIMED entdecken
Crossref

3D-printed polycaprolactone-magnetic nanoparticles composite multifunctional scaffolds for bone tissue regeneration and hyperthermia treatment

Susheem Kanwar, Sanjairaj Vijayavenkataraman

International Journal of Bioprinting · 18.09.2024 · 10 (6) · 4538

DOI: 10.36922/ijb.4538 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 18.09.2024. Verfasst von Susheem Kanwar und 1 weiteren Autor:innen. Die Arbeit wurde bisher 35-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cancer management after tumor resection is characterized by two critical needs: (i) rehabilitation of the resected tissue and (ii) preventing post-surgical tumor recurrence by destroying any residual tumors. The state-of-the-art in literature is limited because it tackles these two major priorities individually: achieving tissue regeneration via autologous grafting and preventing tumor recurrence through chemotherapy. In this paper, extrusion 3D printing has been employed to manufacture composite multi-functional scaffolds with polycaprolactone (PCL) as a polymeric matrix and magnetic nanoparticles (MNPs) in a 0–50 wt% ratio, which would aid in bone regeneration and cancer management via magnetic hyperthermia treatment. The fabricated scaffolds were evaluated for their mechanical, magnetic, and thermal characteristics. The Young’s modulus of the scaffolds increased multi-fold with increasing concentration of MNPs added to PCL (i.e., 26.88 ± 9.02 MPa for pure PCL to 229.06 ± 37.05 MPa for PCL/50 wt% MNP scaffolds). PCL/MNP scaffolds displayed a directly proportional correlation between MNP concentration and saturation magnetization. While the in vitro tests demonstrated a statistically significant cell growth of human mesenchymal stem cells (hMSCs) over 7 days for all MNP concentrations, only the 50% MNP scaffold exhibited an increase in temperature over 41oC when subjected to an alternating magnetic field, making it suitable for the hyperthermia treatment. On application of alternating magnetic fields to PCL and PCL/50 wt% MNP scaffolds, there was an increase in hMSCs proliferation and a decrease in bone cancer cell proliferation, thus validating the potential of the multi-functional scaffold for post-surgical bone cancer management.

Zitieren

APA

Kanwar, S., & Vijayavenkataraman, S. (2024). 3D-printed polycaprolactone-magnetic nanoparticles composite multifunctional scaffolds for bone tissue regeneration and hyperthermia treatment. International Journal of Bioprinting, 10(6), 4538. https://doi.org/10.36922/ijb.4538

Vancouver

Kanwar S, Vijayavenkataraman S. 3D-printed polycaprolactone-magnetic nanoparticles composite multifunctional scaffolds for bone tissue regeneration and hyperthermia treatment. International Journal of Bioprinting. 2024;10(6):4538. doi:10.36922/ijb.4538

BibTeX
@article{Kanwar2024,
  author = {Kanwar, Susheem and Vijayavenkataraman, Sanjairaj},
  title = {3D-printed polycaprolactone-magnetic nanoparticles composite multifunctional scaffolds for bone tissue regeneration and hyperthermia treatment},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {10},
  number = {6},
  pages = {4538},
  doi = {10.36922/ijb.4538}
}
Kostenlos starten →