EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-printed porous functional composite scaffolds with polydopamine decoration for bone regeneration

Jin Qi, Yili Wang, Liping Chen, Linjie Chen, Feng Wen, Lijiang Huang, Pfukwa Rueben, Chunwu Zhang, Huaqiong Li iD

Regenerative Biomaterials · 17.01.2023 · 10

DOI: 10.1093/rb/rbad062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Regenerative Biomaterials, online erschienen am 21.06.2023. Verfasst von Jin Qi und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, Joint Centre of Translational Medicine, The First Affiliated Hospital of Wenzhou Medical University, Wenzhou, Zhejiang 32…. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wenzhou Institute, University of Chinese Academy of Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large size bone defects affect human health and remain a worldwide health problem that needs to be solved immediately. 3D printing technology has attracted substantial attention for preparing penetrable multifunctional scaffolds to promote bone reconditioning and regeneration. Inspired by the spongy structure of natural bone, novel porous degradable scaffolds have been printed using polymerization of lactide and caprolactone (PLCL) and bioactive glass 45S5 (BG), and polydopamine (PDA) was used to decorate the PLCL/BG scaffolds. The physicochemical properties of the PLCL/BG and PLCL/BG/PDA scaffolds were measured, and their osteogenic and angiogenic effects were characterized through a series of experiments both in vitro and in vivo. The results show that the PLCL/BG2/PDA scaffold possessed a good compression modulus and brilliant hydrophilicity. The proliferation, adhesion and osteogenesis of hBMSCs were improved in the PDA coating groups, which exhibited the best performance. The results of the SD rat cranium defect model indicate that PLCL/BG2/PDA obviously promoted osteointegration, which was further confirmed through immunohistochemical staining. Therefore, PDA decoration and the sustained release of bioactive ions (Ca, Si, P) from BG in the 3D-printed PLCL/BG2/PDA scaffold could improve surface bioactivity and promote better osteogenesis and angiogenesis, which may provide a valuable basis for customized implants in extensive bone defect repair applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingangiogenesisbioactive glass compositesbone regenerationpolydopamine

Autor:innen und Institutionen

  • Department of Orthopaedics, Joint Centre of Translational Medicine, The First Affiliated Hospital of Wenzhou Medical University, Wenzhou, Zhejiang 325035, P. R. China.
  • Joint Centre of Translational Medicine, Zhejiang Engineering Research Center for Tissue Repair Materials, Wenzhou Institute, University of Chinese Academy of Sciences, Wenzhou, Zhejiang 325011, P. R. China.
  • University of Chinese Academy of Sciences, Beijing 100049, P. R. China.
  • The Second Affiliated Hospital of Wenzhou Medical University, Wenzhou, Zhejiang 325035, P. R. China.
  • The Affiliated Xiangshan Hospital of Wenzhou Medical University, Ningbo, Zhejiang 315700, P. R. China.
  • Department of Chemistry and Polymer Science, Stellenbosch University, Matieland, Stellenbosch 7602, South Africa.

ORCID-Profile: Huaqiong Li

Förderung

  • Wenzhou Institute, University of Chinese Academy of Sciences

Zitieren

APA

Qi, J., Wang, Y., Chen, L., Chen, L., Wen, F., Huang, L., Rueben, P., Zhang, C., & Li, H. (2023). 3D-printed porous functional composite scaffolds with polydopamine decoration for bone regeneration. Regenerative Biomaterials, 10. https://doi.org/10.1093/rb/rbad062

Vancouver

Qi J, Wang Y, Chen L, Chen L, Wen F, Huang L, et al. 3D-printed porous functional composite scaffolds with polydopamine decoration for bone regeneration. Regenerative Biomaterials. 2023;10. doi:10.1093/rb/rbad062

BibTeX
@article{Qi2023,
  author = {Qi, Jin and Wang, Yili and Chen, Liping and Chen, Linjie and Wen, Feng and Huang, Lijiang and Rueben, Pfukwa and Zhang, Chunwu and Li, Huaqiong},
  title = {3D-printed porous functional composite scaffolds with polydopamine decoration for bone regeneration},
  journal = {Regenerative Biomaterials},
  year = {2023},
  volume = {10},
  doi = {10.1093/rb/rbad062}
}
Kostenlos starten →