Radioprotection Performance Evaluation of 3D-Printed and Conventional Heat-Cured Dental Resins for Radiotherapy Prostheses
Journal of Functional Biomaterials · 25.09.2024 · 15 (10) · 282
DOI: 10.3390/jfb15100282 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Functional Biomaterials, online erschienen am 25.09.2024. Verfasst von Jiangyu Wang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Advanced Prosthodontics, Graduate School, Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 1138510, Japan. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tokyo Metropolitan Government, Japan Society for the Promotion of Science, JSPS KAKENHI.
Abstract (Originalsprache)
3D printing is increasingly used in dentistry, with biocompatible resins playing a key role. This study compared the radioprotective properties of a commonly used 3D-printed resin (Formlabs surgical guide resin) with traditional heat-cured resin and examined the relationship between material thickness and radiation attenuation. The specimens consisted of 3D-printed and heat-cured resin specimens, each measuring 45 × 45 mm2, with five different thicknesses (6, 8, 10, 12, and 14 mm), totaling 100 samples. Both types of resin specimens underwent testing with 150 MU external beam radiation therapy (EBRT) and 400 cGy brachytherapy. Radiation experiments indicated that under EBRT conditions, there were no significant differences in radiation attenuation between the 3D-printed and heat-cured resins across all thickness groups. In brachytherapy, the attenuation of the 3D-printed resin was significantly lower than the heat-cured resin in the 6 mm and 8 mm groups. Specifically, attenuation rates were 48.0 ± 0.7 (3D-printed) vs. 45.2 ± 1.9 (heat-cured) in the 6 mm group, and 39.6 ± 1.3 vs. 37.5 ± 1.1 in the 8 mm group. Both resins showed significant positive linear correlations between thickness and attenuation (p < 0.001) within 6–14 mm. Thus, 3D-printed resin shows promising radioprotective properties and is a viable alternative to traditional heat-cured resin.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Advanced Prosthodontics, Graduate School, Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 1138510, Japan.
- Department of Partial and Complete Denture, The Nippon Dental University School of Life Dentistry, Tokyo 1028159, Japan.
- Radiology Center, Graduate School, Medical and Dental Sciences, Institute of Research, Tokyo Medical and Dental University, Tokyo 1138510, Japan.
- Young Investigator Support Center, Graduate School, Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 1138510, Japan.
- Department of Radiation Therapeutics and Oncology, Graduate School, Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo 1138510, Japan.
ORCID-Profile: Mai Murase, Yuka I Sumita, Masako Akiyama
Förderung
- Tokyo Metropolitan Government
- Japan Society for the Promotion of Science
- JSPS KAKENHI
Zitieren
APA
Wang, J., Murase, M., Sumita, Y. I., Notake, R., Akiyama, M., Yoshimura, R., & Wakabayashi, N. (2024). Radioprotection Performance Evaluation of 3D-Printed and Conventional Heat-Cured Dental Resins for Radiotherapy Prostheses. Journal of Functional Biomaterials, 15(10), 282. https://doi.org/10.3390/jfb15100282
Vancouver
Wang J, Murase M, Sumita YI, Notake R, Akiyama M, Yoshimura R, et al. Radioprotection Performance Evaluation of 3D-Printed and Conventional Heat-Cured Dental Resins for Radiotherapy Prostheses. Journal of Functional Biomaterials. 2024;15(10):282. doi:10.3390/jfb15100282
BibTeX
@article{Wang2024,
author = {Wang, Jiangyu and Murase, Mai and Sumita, Yuka I and Notake, Ryoichi and Akiyama, Masako and Yoshimura, Ryoichi and Wakabayashi, Noriyuki},
title = {Radioprotection Performance Evaluation of 3D-Printed and Conventional Heat-Cured Dental Resins for Radiotherapy Prostheses},
journal = {Journal of Functional Biomaterials},
year = {2024},
volume = {15},
number = {10},
pages = {282},
doi = {10.3390/jfb15100282}
}
EUVIMED