Microstructure of Selective Laser Melted 316L under Non-Equilibrium Solidification Conditions
Journal of Experimental and Theoretical Analyses · 2023
DOI: 10.3390/jeta1020005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Experimental and Theoretical Analyses, 2023. Verfasst von Emre Firat Özel und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Materials Science and Engineering Tuttlingen-IWAT, Hochschule Furtwangen Campus Tuttlingen, University of Freiburg.
Abstract (Originalsprache)
In this study, the microstructural properties of selective laser melted 316L stainless steel were investigated using optical, scanning and transmission electron microscopy as well as X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy. The results show a very fine microstructure with visible melt pool boundaries and austenite as the predominant phase. Extremely fine sub-grain structures can be found within the grains, consisting of colonies of round or elongated cellular structures depending on orientations. Due to the prevailing cooling and solidification conditions, micro-segregations occur, leading to enrichment of the sub-grain boundaries with alloying elements such as silicon, chromium, manganese and molybdenum. The presence of ferrite could be detected in this area using TEM analysis.
Förderung
- Institute of Materials Science and Engineering Tuttlingen-IWAT
- Hochschule Furtwangen Campus Tuttlingen
- University of Freiburg
Zitieren
APA
Özel, E. F., Pede, D., Müller, C., Thomann, Y., Thomann, R., & Mozaffari-Jovein, H. (2023). Microstructure of Selective Laser Melted 316L under Non-Equilibrium Solidification Conditions. Journal of Experimental and Theoretical Analyses. https://doi.org/10.3390/jeta1020005
Vancouver
Özel EF, Pede D, Müller C, Thomann Y, Thomann R, Mozaffari-Jovein H. Microstructure of Selective Laser Melted 316L under Non-Equilibrium Solidification Conditions. Journal of Experimental and Theoretical Analyses. 2023. doi:10.3390/jeta1020005
BibTeX
@article{zel2023,
author = {Özel, Emre Firat and Pede, Dennis and Müller, Claas and Thomann, Yi and Thomann, Ralf and Mozaffari-Jovein, Hadi},
title = {Microstructure of Selective Laser Melted 316L under Non-Equilibrium Solidification Conditions},
journal = {Journal of Experimental and Theoretical Analyses},
year = {2023},
doi = {10.3390/jeta1020005}
}
EUVIMED