EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Laser-Electrochemical Hybrid Polishing of Selective Laser Melted 316L Stainless Steel

Jun Liu, Chunbo Li, Huan Yang iD, Jiani Liu, Jiayan Wang, Leimin Deng, Licun Fang, Can Yang

Micromachines · 11.03.2024 · 15 (3) · 374

DOI: 10.3390/mi15030374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 11.03.2024. Verfasst von Jun Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Sino-German College of Intelligent Manufacturing, Shenzhen Technology University, Shenzhen 518118, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Open Project Program of Wuhan National Laboratory for Optoelectronics, the School-enterprise Cooperation Project of Shenzhen Technology University, Shenzhen Key Project for Technology Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The process of forming metal components through selective laser melting (SLM) results in inherent spherical effects, powder adhesion, and step effects, which collectively lead to surface roughness in stainless steel, limiting its potential for high-end applications. This study utilizes a laser-electrochemical hybrid process to polish SLM-formed 316L stainless steel (SS) and examines the influence of process parameters such as laser power and scanning speed on surface roughness and micro-morphology. A comparative analysis of the surface roughness, microstructure, and wear resistance of SLM-formed 316L SS polished using laser, electrochemical, and laser-electrochemical hybrid processes is presented. The findings demonstrate that, compared to laser and electrochemical polishing alone, the laser-electrochemical hybrid polishing exhibits the most significant improvement in surface roughness and the highest material wear resistance. Additionally, the hybrid process results in a surface free of cracks and only a small number of tiny corrosion holes, making it more suitable for polishing the surface of 316L SS parts manufactured via SLM.

Schlagwörter

Stichwörter der Autor:innen

316L stainless steellaser-electrochemicalselective laser meltingsurface roughness

Autor:innen und Institutionen

  • Sino-German College of Intelligent Manufacturing, Shenzhen Technology University, Shenzhen 518118, China.
  • Wuhan National Research Center for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, China.

ORCID-Profile: Huan Yang

Förderung

  • the Open Project Program of Wuhan National Laboratory for Optoelectronics
  • the School-enterprise Cooperation Project of Shenzhen Technology University
  • Shenzhen Key Project for Technology Development
  • Shenzhen Science and Technology Innovation Commission Project
  • the Stable Support Project of Shenzhen Higher Education Institutions
  • Open Project Program of Wuhan National Laboratory for Optoelectronics
  • School-enterprise Cooperation Project of Shenzhen Technology University
  • Stable Support Project of Shenzhen Higher Education Institutions

Zitieren

APA

Liu, J., Li, C., Yang, H., Liu, J., Wang, J., Deng, L., Fang, L., & Yang, C. (2024). Study on Laser-Electrochemical Hybrid Polishing of Selective Laser Melted 316L Stainless Steel. Micromachines, 15(3), 374. https://doi.org/10.3390/mi15030374

Vancouver

Liu J, Li C, Yang H, Liu J, Wang J, Deng L, et al. Study on Laser-Electrochemical Hybrid Polishing of Selective Laser Melted 316L Stainless Steel. Micromachines. 2024;15(3):374. doi:10.3390/mi15030374

BibTeX
@article{Liu2024,
  author = {Liu, Jun and Li, Chunbo and Yang, Huan and Liu, Jiani and Wang, Jiayan and Deng, Leimin and Fang, Licun and Yang, Can},
  title = {Study on Laser-Electrochemical Hybrid Polishing of Selective Laser Melted 316L Stainless Steel},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {3},
  pages = {374},
  doi = {10.3390/mi15030374}
}
Kostenlos starten →