Laser Processing of Fe-Cr-B Alloys: Microstructure Evolution, Non-Equilibrium Solidification and Wear–Corrosion Performance
Materials · 30.06.2026 · 19 (13) · 2767
DOI: 10.3390/ma19132767 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 30.06.2026. Verfasst von Lei He und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Industry and Information Technology of the People's Republic of China, Advanced Materials—National Science and Technology Major Project.
Abstract (Originalsprache)
Fe-Cr-B alloys are recognized as candidate wear- and corrosion-resistant materials strengthened by high-hardness boride phases. Conventional casting produces coarse continuous network borides and severe elemental segregation under near-equilibrium slow solidification (10−1–102 K/s), resulting in high brittleness and limited service reliability. Laser processing includes laser cladding (103–106 K/s), LPBF/DED (106–108 K/s) and laser remelting, which feature extreme non-equilibrium rapid solidification but differ significantly in thermal gradient G, solidification rate R, and phase evolution behavior. To avoid over-extrapolation, this review strictly classifies evidence into direct LPBF evidence, direct DED evidence, laser cladding evidence, casting evidence, and indirect inference. Quantitative comparisons reveal that laser cladding refines borides from 150 to 300 μm to 10.8–20 μm, while DED further achieves 1–5 μm equiaxed grains and relative density > 98%. Meanwhile, laser-cladding Fe-Cr-B coatings achieve a maximum hardness of ~1052 HV0.5, and ~18% higher wear resistance and ~70% lower cavitation mass loss compared with cast counterparts. Non-equilibrium mechanisms including solute trapping, interface absolute stability, constitutional undercooling, and columnar-to-equiaxed transition (CET) controlled by the Gn/R ratio are systematically analyzed. Thermal–solutal coupling, grain nucleation, and boride precipitation kinetics under rapid cooling are emphasized. Current limitations include incomplete non-equilibrium thermodynamic databases, insufficient standardization, limited post-processing (heat treatment, HIP) studies, and missing unified performance datasets. Future directions are proposed toward quantitative phase-field modeling, standardized tribocorrosion characterization, high-throughput experiments, and machine learning-assisted optimization. This review provides a rigorous analytical framework for the composition–process–microstructure–performance design of laser-processed Fe-Cr-B alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
- Luoyang Ship Material Research Institute, Luoyang 471023, China.
- National Key Laboratory of Marine Corrosion and Protection, Luoyang 471023, China.
- Sodium-Ion Battery Energy Storage Technology Key Laboratory Cultivation Base Jointly Constructed by the Department and City of Shanxi Province, Yangquan 045000, China.
ORCID-Profile: Changle Zhang, Jiang Ju
Förderung
- Ministry of Industry and Information Technology of the People's Republic of China
- Advanced Materials—National Science and Technology Major Project
Zitieren
APA
He, L., Zhang, C., Ju, J., Zhang, Z., Liu, J., & Zhang, H. (2026). Laser Processing of Fe-Cr-B Alloys: Microstructure Evolution, Non-Equilibrium Solidification and Wear–Corrosion Performance. Materials, 19(13), 2767. https://doi.org/10.3390/ma19132767
Vancouver
He L, Zhang C, Ju J, Zhang Z, Liu J, Zhang H. Laser Processing of Fe-Cr-B Alloys: Microstructure Evolution, Non-Equilibrium Solidification and Wear–Corrosion Performance. Materials. 2026;19(13):2767. doi:10.3390/ma19132767
BibTeX
@article{He2026,
author = {He, Lei and Zhang, Changle and Ju, Jiang and Zhang, Zhizu and Liu, Jintao and Zhang, Huajun},
title = {Laser Processing of Fe-Cr-B Alloys: Microstructure Evolution, Non-Equilibrium Solidification and Wear–Corrosion Performance},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2767},
doi = {10.3390/ma19132767}
}
EUVIMED