Modal-Based Identification of Equivalent Material Properties of 3D-Printed Lattice-Core Plates with Different Infill Levels
Journal of Composites Science · 19.11.2026 · 10 (11) · 623
DOI: 10.3390/jcs10110623 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 19.11.2026. Verfasst von Róbert Huňady und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Research and Development Agency, Scientific Grant Agency of the Ministry of Education, Research, Development and Youth of the Slovak Republic and the Slovak Academy of Sciences, Jan Amos Komensky Operational Program.
Abstract (Originalsprache)
This study presents a modal-based approach for identifying the equivalent material properties of 3D-printed plates with lattice cores without requiring detailed modelling of their internal geometry. Plates with different core infill densities ranging from 20% to 100% were experimentally investigated by modal analysis and represented by a homogenized orthotropic model with square symmetry, characterized by three independent equivalent elastic constants: Young’s modulus, Poisson’s ratio, and shear modulus. These constants were identified by minimizing a weighted objective function combining discrepancies in natural frequencies and mode shapes quantified by the Modal Assurance Criterion, while the modal characteristics of the homogenized plates were calculated using the Ritz method. The identified models showed high agreement with the experimental modal characteristics across all investigated infill densities. Independent identification of the shear modulus enabled the twisting stiffness to be represented without the constraints imposed by isotropy, revealing a non-monotonic dependence of the deviation from isotropic constitutive behavior on core infill density. Comparison with independently optimized isotropic models confirmed that the additional elastic constant improves the prediction of natural frequencies and mode shapes, particularly at intermediate infill densities. Additional finite element analyses highlighted the limitations of using nominal material properties and demonstrated the substantially lower computational cost of the proposed identification approach compared with FE model updating. The methodology provides an efficient means of obtaining experimentally informed equivalent material properties for simplified dynamic modelling of 3D-printed lattice-core structures.
Förderung
- Slovak Research and Development Agency
- Scientific Grant Agency of the Ministry of Education, Research, Development and Youth of the Slovak Republic and the Slovak Academy of Sciences
- Jan Amos Komensky Operational Program
Zitieren
APA
Huňady, R., Fabian, M., Hagara, M., & Palička, P. (2026). Modal-Based Identification of Equivalent Material Properties of 3D-Printed Lattice-Core Plates with Different Infill Levels. Journal of Composites Science, 10(11), 623. https://doi.org/10.3390/jcs10110623
Vancouver
Huňady R, Fabian M, Hagara M, Palička P. Modal-Based Identification of Equivalent Material Properties of 3D-Printed Lattice-Core Plates with Different Infill Levels. Journal of Composites Science. 2026;10(11):623. doi:10.3390/jcs10110623
BibTeX
@article{Huady2026,
author = {Huňady, Róbert and Fabian, Michal and Hagara, Martin and Palička, Peter},
title = {Modal-Based Identification of Equivalent Material Properties of 3D-Printed Lattice-Core Plates with Different Infill Levels},
journal = {Journal of Composites Science},
year = {2026},
volume = {10},
number = {11},
pages = {623},
doi = {10.3390/jcs10110623}
}
EUVIMED