Experimental Study on the Effective Thermal Conductivity of 3D‐Printed PLA Annular Thermal Insulators With Different Infill Parameters
Macromolecular Symposia · 2026-06 · 415 (3)
DOI: 10.1002/masy.70394 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Symposia, online erschienen am 16.05.2026. Verfasst von Gabriel‐Dumitru Tcaciuc und 4 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
3D‐printed parts have the potential to be used as low‐temperature thermal insulators in different applications where custom geometries and aesthetics are required. The present paper describes the experimental process for measuring the effective thermal conductivity of different 2D infill patterns and infill densities in 3D‐printed annular thermal insulators made from PLA, placed around a heated cylindrical electrical resistance. The temperature differences between inner and outer radii are measured with thermocouples in five points across the semi‐circumference in order to capture the anisotropic behavior of convection within infill voids, which depends on the direction of gravity. Heat flux across the insulator is determined by measuring the electrical power input, and the apparent thermal conductivity is calculated based on the temperature differences. Common infill patterns are tested, with infill densities of 30%, 35%, and 43%.
Zitieren
APA
Tcaciuc, G., Popovici, V., Lupu, A., Popescu, A., & Panaite, C. (2026). Experimental Study on the Effective Thermal Conductivity of 3D‐Printed PLA Annular Thermal Insulators With Different Infill Parameters. Macromolecular Symposia, 415(3). https://doi.org/10.1002/masy.70394
Vancouver
Tcaciuc G, Popovici V, Lupu A, Popescu A, Panaite C. Experimental Study on the Effective Thermal Conductivity of 3D‐Printed PLA Annular Thermal Insulators With Different Infill Parameters. Macromolecular Symposia. 2026;415(3). doi:10.1002/masy.70394
BibTeX
@article{Tcaciuc2026,
author = {Tcaciuc, Gabriel‐Dumitru and Popovici, Valentin and Lupu, Ana‐Georgiana and Popescu, Aristotel and Panaite, Carmen‐Ema},
title = {Experimental Study on the Effective Thermal Conductivity of 3D‐Printed PLA Annular Thermal Insulators With Different Infill Parameters},
journal = {Macromolecular Symposia},
year = {2026},
volume = {415},
number = {3},
doi = {10.1002/masy.70394}
}
EUVIMED