Flexural performance of 3D-Printed auxetic panels: Influence of core design, material, and orientation
Journal of Reinforced Plastics and Composites · 2026-08 · 45 (15-16) · 3626-3639
DOI: 10.1177/07316844251390984 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 17.10.2025. Verfasst von Fatih Huzeyfe Öztürk und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 67 Literaturangaben.
Abstract (Originalsprache)
Auxetic structures, characterized by a negative Poisson’s ratio, expand laterally under axial loading and offer superior energy absorption and deformation capacity, making them promising candidates as core materials in sandwich structures. In this study, sandwich panels with three auxetic core geometries (star-4, re-entrant, and honeycomb) were fabricated using fused filament fabrication (FFF). The cores were produced using three thermoplastic materials: polylactic acid (PLA), polyethylene terephthalate glycol (PETG), and carbon fiber-reinforced polyamide (ePAHT-CF). PLA was also used for the face sheets, printed in three orientations (0°, 0/90°, and ±45°) to evaluate anisotropy effects. Mechanical performance was assessed through three-point bending tests, focusing on peak load, energy absorption (EA), and specific energy absorption (SEA). The honeycomb core with PLA face sheets at 0° yielded the highest peak load (702.97 N), a 351% increase compared to the lowest-performing specimen (star-4/ePAHT-CF at 155.76 N). The highest EA (9.64 J) and SEA (0.52 J/g) were achieved by the honeycomb/ePAHT-CF core with ±45° orientation. ANOVA results confirmed that core geometry and material type significantly affect peak load. Overall, the mechanical behavior is governed by the synergistic effects of geometry, material, and printing parameters.
Zitieren
APA
Öztürk, F. H., Pehlivan, F., & Temiz, A. (2026). Flexural performance of 3D-Printed auxetic panels: Influence of core design, material, and orientation. Journal of Reinforced Plastics and Composites, 45(15-16), 3626-3639. https://doi.org/10.1177/07316844251390984
Vancouver
Öztürk FH, Pehlivan F, Temiz A. Flexural performance of 3D-Printed auxetic panels: Influence of core design, material, and orientation. Journal of Reinforced Plastics and Composites. 2026;45(15-16):3626-3639. doi:10.1177/07316844251390984
BibTeX
@article{ztrk2026,
author = {Öztürk, Fatih Huzeyfe and Pehlivan, Fatih and Temiz, Abdurrahim},
title = {Flexural performance of 3D-Printed auxetic panels: Influence of core design, material, and orientation},
journal = {Journal of Reinforced Plastics and Composites},
year = {2026},
volume = {45},
number = {15-16},
pages = {3626--3639},
doi = {10.1177/07316844251390984}
}
EUVIMED