Implementation of EnDat Interface Master Using Configurable Logic Block in MCU
Electronics · 2024-03-17 · 13 (6) · 1101
DOI: 10.3390/electronics13061101 ↗At a glance
Journal article in Electronics, published online on 2024-03-17. Written by Kyungah Kim and 2 co-authors. Cited 2 times so far (Crossref); 28 references. The full text is freely available (open access, CC BY 4.0). Funded by: Korea Evaluation Institute of Industrial Technology (KEIT) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea.
Abstract (original language)
In this study, we propose an implementation method of the Encoder Data (EnDat) interface master for slave encoders using only a configurable logic block (CLB) and a serial peripheral interface (SPI) integrated into microcontroller units. By programming the CLB device to execute logic functions and finite state machines designed for the EnDat interface master operation, we realize the EnDat and SPI clocks that are required for the EnDat interface master operation. This approach is cost-efficient because additional hardware components, such as a field-programmable gate array or a complex programmable logic device, are unnecessary for the master implementation. We build a one-axis feed drive system that is powered by an AC motor and equipped with an EnDat linear encoder for measuring table speed and position. By performing various experiments for table position and speed control based on the built feed drive system, we verify the performance and practical usefulness of the implemented EnDat interface master. The maximum EnDat clock frequency without the propagation delay compensation is achieved by 2 MHz, which can cope with 16 kHz control cycle frequency. The usefulness is demonstrated by showing the table speed and position control performance that are acceptable in real applications.
Funding
- Korea Evaluation Institute of Industrial Technology (KEIT) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea
Cite
APA
Kim, K., Tran, D. M., & Choi, J. (2024). Implementation of EnDat Interface Master Using Configurable Logic Block in MCU. Electronics, 13(6), 1101. https://doi.org/10.3390/electronics13061101
Vancouver
Kim K, Tran DM, Choi J. Implementation of EnDat Interface Master Using Configurable Logic Block in MCU. Electronics. 2024;13(6):1101. doi:10.3390/electronics13061101
BibTeX
@article{Kim2024,
author = {Kim, Kyungah and Tran, Duc M. and Choi, Joon-Young},
title = {Implementation of EnDat Interface Master Using Configurable Logic Block in MCU},
journal = {Electronics},
year = {2024},
volume = {13},
number = {6},
pages = {1101},
doi = {10.3390/electronics13061101}
}
EUVIMED