EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CLB-Based Development of BiSS-C Interface Master for Motor Encoders

Duc M. Tran, Kyungah Kim, Joon-Young Choi

Electronics · 09.02.2023 · 12 (4) · 886

DOI: 10.3390/electronics12040886 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Electronics, online erschienen am 09.02.2023. Verfasst von Duc M. Tran und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Evaluation Institute of Industrial Technology(KEIT), Ministry of Trade, Industry & Energy(MOTIE) of the Republic of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Encoder interfaces should be operated in real time with high precision and fast processing for industrial motor control systems. The continuous bidirectional serial synchronous (BiSS-C) interface is an open-source serial communication protocol designed for motor encoders and is suitable for industrial purposes because of its fast serial communication speed. In this study, we propose a method for developing a BiSS-C interface master for a motor encoder slave, using only the configurable logic block (CLB) peripheral integrated into TI microcontroller units. By analyzing the detailed operation protocol of the BiSS-C interface, we create the truth and state tables for logic circuits and finite state machines, which are required for the BiSS-C interface master. Then, by programming the CLB based on the created truth and state tables, we implement the master clock, serial peripheral interface (SPI) clock, and operational process for the master. This approach is cost-efficient because additional hardware components, such as a field-programmable gate array or a complex programmable logic device, are not required for the master implementations. The developed method can be immediately applied to developing the masters for other BiSS-C encoders with different specifications, which is certainly necessary for a motor drive development and test. By building an AC motor control system with the developed master and performing various experiments, we verify the performance and practical usefulness of the developed BiSS-C interface master. The maximum master clock frequency without any CRC errors is achieved by 6.25 MHz, which can cope with more than 20 kHz motor control cycle frequency. The usefulness is demonstrated by showing the motor speed and position control performance that are acceptable in real applications.

Förderung

  • Korea Evaluation Institute of Industrial Technology(KEIT)
  • Ministry of Trade, Industry & Energy(MOTIE) of the Republic of Korea

Zitieren

APA

Tran, D. M., Kim, K., & Choi, J. (2023). CLB-Based Development of BiSS-C Interface Master for Motor Encoders. Electronics, 12(4), 886. https://doi.org/10.3390/electronics12040886

Vancouver

Tran DM, Kim K, Choi J. CLB-Based Development of BiSS-C Interface Master for Motor Encoders. Electronics. 2023;12(4):886. doi:10.3390/electronics12040886

BibTeX
@article{Tran2023,
  author = {Tran, Duc M. and Kim, Kyungah and Choi, Joon-Young},
  title = {CLB-Based Development of BiSS-C Interface Master for Motor Encoders},
  journal = {Electronics},
  year = {2023},
  volume = {12},
  number = {4},
  pages = {886},
  doi = {10.3390/electronics12040886}
}
Kostenlos starten →