Configurable Ultracompact Electrode Kernel for Electromyography Recordings Using Screen Printed Logic Circuits Based on Organic Electrochemical Transistors
Small Structures · 2026-11 · 7 (11)
DOI: 10.1002/sstr.70655 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Structures, online erschienen am 30.10.2026. Verfasst von Luis Pelaez Murciego und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020 Framework Programme.
Abstract (Originalsprache)
High‐density electromyography (EMG) using matrix electrodes requires complex hardware and extensive wiring. Here, the concept of screen printed multipad electrode kernels based on organic electrochemical transistors (OECTs) is demonstrated. Each kernel integrates eight OECT‐based EMG transmission channels and an OECT‐based 3–8 decoder for channel selection; three inputs set one of the eight channels in conductive state, while the others are blocked, to allow EMG signal routing from the selected skin electrode pad to the input of an electrophysiological amplifier. The functionality of the device is verified in the laboratory and during real‐time EMG recording by placing the kernel on the arm of a participant performing muscle contractions. The signals recorded by the kernel are qualitatively similar to those acquired using a benchmark EMG electrode, although the signal‐to‐noise ratio is lower. This is mainly due to the smaller size of the skin pads, which increases the impedance of the electrode–skin contacts. Multiple kernels can be integrated to further enhance the configurability and enable skin pad selection over relevant muscle regions, reducing the complexity of amplification and acquisition hardware. Additionally, screen printing on conformable substrates enables scalable manufacturing of multipad electrodes in different shapes and sizes, tailored to specific wearable applications.
Förderung
- Horizon 2020 Framework Programme
Zitieren
APA
Murciego, L. P., Herlogsson, L., Mulla, M. Y., Strandberg, J., Spaich, E., Dosen, S., & Ersman, P. A. (2026). Configurable Ultracompact Electrode Kernel for Electromyography Recordings Using Screen Printed Logic Circuits Based on Organic Electrochemical Transistors. Small Structures, 7(11). https://doi.org/10.1002/sstr.70655
Vancouver
Murciego LP, Herlogsson L, Mulla MY, Strandberg J, Spaich E, Dosen S, et al. Configurable Ultracompact Electrode Kernel for Electromyography Recordings Using Screen Printed Logic Circuits Based on Organic Electrochemical Transistors. Small Structures. 2026;7(11). doi:10.1002/sstr.70655
BibTeX
@article{Murciego2026,
author = {Murciego, Luis Pelaez and Herlogsson, Lars and Mulla, Mohammad Yusuf and Strandberg, Jan and Spaich, Erika and Dosen, Strahinja and Ersman, Peter Andersson},
title = {Configurable Ultracompact Electrode Kernel for Electromyography Recordings Using Screen Printed Logic Circuits Based on Organic Electrochemical Transistors},
journal = {Small Structures},
year = {2026},
volume = {7},
number = {11},
doi = {10.1002/sstr.70655}
}
EUVIMED