EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Residual Enamel Stress in a Mandibular First Molar Restored with a Ceromer Onlay Under Vertical and Oblique Loading: A Three-Dimensional Finite Element Analysis

Rosa Alicia Hernández-Vázquez, Jesus Alejandro Serrato-Pedrosa, Verónica Loera-Castañeda, Rosa Adriana Rivera-Díaz, Salvador Cruz-Lopez, Rodrigo Arturo Marquet-Rivera

Dentistry Journal · 09.11.2026 · 14 (11) · 733

DOI: 10.3390/dj14110733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dentistry Journal, online erschienen am 09.11.2026. Verfasst von Rosa Alicia Hernández-Vázquez und 5 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Instituto Politécnico Nacional, Secretaría de Ciencia, Humanidades, Tecnología e Innovación.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background/Objectives: Residual enamel fracture is a frequent complication of extensively prepared teeth. This finite element analysis (FEA) characterized stresses in enamel, dentin and restoration of a mandibular first molar restored with a ceromer onlay under vertical and oblique loading, and their sensitivity to boundary conditions and restoration stiffness.

Methods

A single-geometry model from cone-beam computed tomography used linear elastic, isotropic materials and bonded interfaces. A static 698 N load was applied axially and at 30° with the root fixed 2 mm below the cervical limit of enamel. Mesh, support position, an elastic periodontal ligament (PDL) support and restoration modulus were varied. Maximum principal stress (σ1) was reported as peak, 99th percentile and proportion of nodes above published strengths.

Results

Peak enamel σ1 was 51.0 MPa (vertical) and 167.6 MPa (oblique); 1.6% and 7.6% of enamel nodes reached 11.5 MPa, the lowest reported tensile strength. Peaks lay at the restoration margin and cervical edge, growing with mesh refinement. An elastic PDL support raised the enamel 99th percentile by 7% to 15%; restoration modulus changed it by +11% to −15%.

Conclusions

Tensile concentrations are localized, increase with load obliquity and depend on the support conditions analyzed. Validation is required.

Förderung

  • Instituto Politécnico Nacional
  • Secretaría de Ciencia, Humanidades, Tecnología e Innovación

Zitieren

APA

Hernández-Vázquez, R. A., Serrato-Pedrosa, J. A., Loera-Castañeda, V., Rivera-Díaz, R. A., Cruz-Lopez, S., & Marquet-Rivera, R. A. (2026). Residual Enamel Stress in a Mandibular First Molar Restored with a Ceromer Onlay Under Vertical and Oblique Loading: A Three-Dimensional Finite Element Analysis. Dentistry Journal, 14(11), 733. https://doi.org/10.3390/dj14110733

Vancouver

Hernández-Vázquez RA, Serrato-Pedrosa JA, Loera-Castañeda V, Rivera-Díaz RA, Cruz-Lopez S, Marquet-Rivera RA. Residual Enamel Stress in a Mandibular First Molar Restored with a Ceromer Onlay Under Vertical and Oblique Loading: A Three-Dimensional Finite Element Analysis. Dentistry Journal. 2026;14(11):733. doi:10.3390/dj14110733

BibTeX
@article{HernndezVzquez2026,
  author = {Hernández-Vázquez, Rosa Alicia and Serrato-Pedrosa, Jesus Alejandro and Loera-Castañeda, Verónica and Rivera-Díaz, Rosa Adriana and Cruz-Lopez, Salvador and Marquet-Rivera, Rodrigo Arturo},
  title = {Residual Enamel Stress in a Mandibular First Molar Restored with a Ceromer Onlay Under Vertical and Oblique Loading: A Three-Dimensional Finite Element Analysis},
  journal = {Dentistry Journal},
  year = {2026},
  volume = {14},
  number = {11},
  pages = {733},
  doi = {10.3390/dj14110733}
}
Kostenlos starten →