Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis
Clinical Oral Investigations · 14.05.2024 · 28 (6)
DOI: 10.1007/s00784-024-05715-1 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical Oral Investigations, online erschienen am 14.05.2024. Verfasst von Qingting Yao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Stomatology, Xuchang Central Hospital, Xuchang, 461000, China. Hauptthemen laut MEDLINE: Finite Element Analysis, Molar, Mandible, Dental Pulp Cavity. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben.
Abstract (Originalsprache)
OBJECTIVE: This study used image-based finite element analysis (FEA) to assess the biomechanical changes in mandibular first molars resulting from alterations in the position of the root canal isthmus. METHODS: A healthy mandibular first molar, characterized by two intact root canals and a cavity-free surface, was selected as the subject. A three-dimensional model for the molar was established using scanned images of the patient's mandibular teeth. Subsequently, four distinct finite element models were created, each representing varied root canal morphologies: non-isthmus (Group A), isthmus located at the upper 1/3 of the root (Group B), middle 1/3 of the root (Group C), and lower 1/3 of the root (Group D). A static load of 200 N was applied along the tooth's longitudinal axis on the occlusal surface to simulate regular chewing forces. The biomechanical assessment was conducted regarding the mechanical stress profile within the root dentin. The equivalent stress (Von Mises stress) was used to assess the biomechanical features of mandibular teeth under mechanical loading. RESULTS: In Group A (without an isthmus), the maximum stress was 22.2 MPa, while experimental groups with an isthmus exhibited higher stresses, reaching up to 29.4 MPa. All maximum stresses were concentrated near the apical foramen. The presence of the isthmus modified the stress distribution in the dentin wall of the tooth canal. Notably, dentin stresses at specific locations demonstrated differences: at 8 mm from the root tip, Group B: 13.6 MPa vs. Group A: 11.4 MPa; at 3 mm from the root tip, Group C: 14.2 MPa vs. Group A: 4.5 MPa; at 1 mm from the root tip, Group D: 25.1 MPa vs. Group A: 10.3 MPa. The maximum stress in the root canal dentin within the isthmus region was located either at the top or bottom of the isthmus. CONCLUSION: A root canal isthmus modifies the stress profile within the dentin. The maximum stress occurs near the apical foramen and significantly increases when the isthmus is located closer to the apical foramina.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Stomatology, Xuchang Central Hospital, Xuchang, 461000, China.
- Department of Endodontics, People's Hospital of Xinjiang Uygur Autonomous Region, Urumqi, 830001, China.
- Department of Dentoalveolar Surgery, People's Hospital of Xinjiang Uygur Autonomous Region, Urumqi, 830001, China.
- Postgraduate College of Xinjiang Medical University, Urumqi, 830054, China.
- Department of Endodontics, People's Hospital of Xinjiang Uygur Autonomous Region, Urumqi, 830001, China. 27045899@qq.com.
Zitieren
APA
Yao, Q., Zhuang, Y., Aji, Y., Zhang, Q., Luo, Y., & Li, S. (2024). Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis. Clinical Oral Investigations, 28(6). https://doi.org/10.1007/s00784-024-05715-1
Vancouver
Yao Q, Zhuang Y, Aji Y, Zhang Q, Luo Y, Li S. Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis. Clinical Oral Investigations. 2024;28(6). doi:10.1007/s00784-024-05715-1
BibTeX
@article{Yao2024,
author = {Yao, Qingting and Zhuang, Youmei and Aji, Yaerken and Zhang, Qilin and Luo, Yixiang and Li, Shuhui},
title = {Biomechanical impact of different isthmus positions in mandibular first molar root canals: a finite element analysis},
journal = {Clinical Oral Investigations},
year = {2024},
volume = {28},
number = {6},
doi = {10.1007/s00784-024-05715-1}
}
EUVIMED