EUVIMEDEUVIMED entdecken
Crossref

Finite element modeling of an intact and cracked mandibular second molar under quantitative percussion diagnostics loading

Jie Shen, Nasrin Taheri-Nassaj, Cherilyn G Sheets, James C Earthman

The Journal of Prosthetic Dentistry · 2025-12 · 134 (6) · 2368-2374

DOI: 10.1016/j.prosdent.2024.09.003 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2025-12. Verfasst von Jie Shen und 3 weiteren Autor:innen. Beteiligte Einrichtung: PhD Candidate, Department of Materials Science and Engineering, University of California, Irvine, Irvine, Calif. Electronic address: shenj8@uci.edu. Hauptthemen laut MEDLINE: Finite Element Analysis, Molar, Percussion, Dental Stress Analysis. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Quantitative percussion diagnostics (QPD) has been devised to nondestructively evaluate the mechanical integrity of human teeth and implants, the mechanical integrity of the underlying bone, and the presence of cracks, but the mechanism is not clearly understood. PURPOSE: The purpose of this study is to better understand the dynamic behavior of a tooth under conditions consistent with QPD by focusing on physiologically accurate 3D finite element models of a human mandibular second molar with surrounding tissues. MATERIAL AND METHODS: Finite element analysis (FEA) was used to study the force response of dental structures measured by the sensor in a QPD handpiece. A defect-free (intact) and a cracked tooth model containing a vertical crack involving enamel, dentin, periodontal ligament, bone, and the QPD percussion rod were used for this purpose. Different crack gap spaces were studied for comparison. The FEA model was validated with clinical QPD data for a second mandibular molar containing a vertical crack that subsequently had to be extracted. The location and size of the vertical crack was determined once the tooth was extracted. RESULTS: The present FEA results exhibited features consistent with those of corresponding clinical data, thus verifying the model. An examination of the relative acceleration of the crack faces with respect to each other revealed that an oscillation between the crack surfaces results in secondary peaks in the QPD energy return response compared with that of an intact tooth. CONCLUSIONS: The present FEA modeling can generate simulated QPD results that exhibit established distinguishing characteristics in clinical QPD data for intact and cracked second mandibular molars. The model results also give insight into how QPD detects the presence of cracks and show that the oscillation of crack surfaces can produce the multipeak QPD results for a cracked molar observed clinically.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisMolarPercussionDental Stress AnalysisTooth FracturesHumansMandibleDental EnamelPeriodontal LigamentBiomechanical PhenomenaDentinStress, MechanicalAlveolar Process

Autor:innen und Institutionen

  • PhD Candidate, Department of Materials Science and Engineering, University of California, Irvine, Irvine, Calif. Electronic address: shenj8@uci.edu.
  • Postdoctoral Researcher, Department of Materials Science and Engineering, University of California, Irvine, Irvine, Calif.
  • Co-Executive Director, Research and Teaching Divisions, Newport Coast Oral Facial Institute, Newport Beach, Calif.
  • Professor, Department of Materials Science and Engineering, Department of Biomedical Engineering, University of California, Irvine, Irvine, Calif.

Zitieren

APA

Shen, J., Taheri-Nassaj, N., Sheets, C. G., & Earthman, J. C. (2025). Finite element modeling of an intact and cracked mandibular second molar under quantitative percussion diagnostics loading. The Journal of Prosthetic Dentistry, 134(6), 2368-2374. https://doi.org/10.1016/j.prosdent.2024.09.003

Vancouver

Shen J, Taheri-Nassaj N, Sheets CG, Earthman JC. Finite element modeling of an intact and cracked mandibular second molar under quantitative percussion diagnostics loading. The Journal of Prosthetic Dentistry. 2025;134(6):2368-2374. doi:10.1016/j.prosdent.2024.09.003

BibTeX
@article{Shen2025,
  author = {Shen, Jie and Taheri-Nassaj, Nasrin and Sheets, Cherilyn G and Earthman, James C},
  title = {Finite element modeling of an intact and cracked mandibular second molar under quantitative percussion diagnostics loading},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2025},
  volume = {134},
  number = {6},
  pages = {2368--2374},
  doi = {10.1016/j.prosdent.2024.09.003}
}
Kostenlos starten →