Mechanical Performance of Milled CAD/CAM Versus 3D-Printed Dental Prostheses: A Systematic Review and Meta-Analysis of Flexural Strength and Fracture Resistance
Dentistry Journal · 29.05.2026 · 14 (6) · 325
DOI: 10.3390/dj14060325 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Dentistry Journal, online erschienen am 29.05.2026. Verfasst von Luis Chauca-Bajaña und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Dentistry, Universidad Católica de Santiago de Guayaquil (UCSG), Guayas 090101, Ecuador. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background/Objectives: The growing adoption of digital technologies in prosthodontics has led to the widespread use of computer-aided design and computer-aided manufacturing (CAD/CAM) and three-dimensional (3D) printing for dental prostheses. However, differences in mechanical performance, particularly flexural strength and fracture resistance, remain a concern.
Objective
To systematically evaluate and compare the flexural strength and fracture resistance of milled CAD/CAM and 3D-printed dental prostheses.
Methods
A systematic review and meta-analysis were conducted following PRISMA 2020 guidelines. A comprehensive search was performed across multiple databases, including PubMed, Scopus, Web of Science, and Cochrane Library. In vitro studies comparing milled and 3D-printed prosthetic materials were included. Data extraction and risk of bias assessment were performed independently by multiple reviewers. A random-effects meta-analysis using standardized mean differences (SMD) was conducted.
Results
Five studies were included in the meta-analysis for flexural strength. Milled CAD/CAM materials demonstrated significantly higher flexural strength compared to 3D-printed resins (SMD = 3.70; 95% CI: 0.80–6.59; p = 0.012), with substantial heterogeneity (I2 = 93.3%). Fracture resistance results were inconsistent and influenced by individual studies, with sensitivity analyses showing variability in pooled estimates. Overall, the risk of bias was considered low, although some concerns were identified in randomization and blinding.
Conclusions
CAD/CAM-milled materials exhibit superior flexural strength, while fracture resistance outcomes remain variable. Although 3D-printed materials may be clinically acceptable, further standardized studies are required to confirm their mechanical reliability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Dentistry, Universidad Católica de Santiago de Guayaquil (UCSG), Guayas 090101, Ecuador.
- School of Dentistry, Universidad Bolivariana del Ecuador, Durán 092406, Ecuador.
- Oral Rehabilitation, College Dentistry, University of Guayaquil, Guayaquil 090101, Ecuador.
- Carrera de Odontología, Universidad de Las Américas Ecuador (UDLA), Quito 170102, Ecuador.
ORCID-Profile: Luis Chauca-Bajaña, Andrea Ordoñez-Balladares, Nayely Teran-Sánchez, Byron Velasquez Ron
Zitieren
APA
Chauca-Bajaña, L., Zambrano Manzaba, G. G., Ordoñez-Balladares, A., Caicedo-Quiroz, R., Rodríguez Zuleta, M. D., Suarez Palacios, J. C., Teran-Sánchez, N., Sánchez Salcedo, A. C., & Velasquez Ron, B. (2026). Mechanical Performance of Milled CAD/CAM Versus 3D-Printed Dental Prostheses: A Systematic Review and Meta-Analysis of Flexural Strength and Fracture Resistance. Dentistry Journal, 14(6), 325. https://doi.org/10.3390/dj14060325
Vancouver
Chauca-Bajaña L, Zambrano Manzaba GG, Ordoñez-Balladares A, Caicedo-Quiroz R, Rodríguez Zuleta MD, Suarez Palacios JC, et al. Mechanical Performance of Milled CAD/CAM Versus 3D-Printed Dental Prostheses: A Systematic Review and Meta-Analysis of Flexural Strength and Fracture Resistance. Dentistry Journal. 2026;14(6):325. doi:10.3390/dj14060325
BibTeX
@article{ChaucaBajaa2026,
author = {Chauca-Bajaña, Luis and Zambrano Manzaba, Gabriela Guadalupe and Ordoñez-Balladares, Andrea and Caicedo-Quiroz, Rosangela and Rodríguez Zuleta, Marcos Daniel and Suarez Palacios, Juan Carlos and Teran-Sánchez, Nayely and Sánchez Salcedo, Andrea Carolina and Velasquez Ron, Byron},
title = {Mechanical Performance of Milled CAD/CAM Versus 3D-Printed Dental Prostheses: A Systematic Review and Meta-Analysis of Flexural Strength and Fracture Resistance},
journal = {Dentistry Journal},
year = {2026},
volume = {14},
number = {6},
pages = {325},
doi = {10.3390/dj14060325}
}
EUVIMED